Bolt anchor FAZ II Plus with cap nut

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchorage depths and easy installation, the bolt anchor FAZ II Plus GS can be used very flexibly. The proven expansion segment transfers the loads safely into the concrete and provides maximum load-bearing capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut not only gives an attractive finish, but also ensures accident-free installation thanks to its rounded shape. Features Quick and easy installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24, with and without the filling washer FFD.Adjustment to the loads to the millimetre through the variable anchorage depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides a safe situation.Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Crash barriersBrackets

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchoring depths and the simple installation, the bolt anchor FAZ II Plus GS can be used in a particularly flexible way. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut gives not only an attractive finish, but also accident-free installation thanks to its rounded shape. Features Fast and simple installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives a safe situation.Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchoring depth allows millimetre-accurate adaptation to the load. Applications Crash barriersBrackets

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchorage depths and easy installation, the bolt anchor FAZ II Plus GS can be used very flexibly. The proven expansion segment transfers the loads safely into the concrete and provides maximum load-bearing capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut not only gives an attractive finish, but also ensures accident-free installation thanks to its rounded shape. Features Quick and easy installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24, with and without the filling washer FFD.Adjustment to the loads to the millimetre through the variable anchorage depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides a safe situation.Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Crash barriersBrackets

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchoring depths and the simple installation, the bolt anchor FAZ II Plus GS can be used in a particularly flexible way. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut gives not only an attractive finish, but also accident-free installation thanks to its rounded shape. Features Fast and simple installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives a safe situation.Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchoring depth allows millimetre-accurate adaptation to the load. Applications Crash barriersBrackets

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchorage depths and easy installation, the bolt anchor FAZ II Plus GS can be used very flexibly. The proven expansion segment transfers the loads safely into the concrete and provides maximum load-bearing capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut not only gives an attractive finish, but also ensures accident-free installation thanks to its rounded shape. Features Quick and easy installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24, with and without the filling washer FFD.Adjustment to the loads to the millimetre through the variable anchorage depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides a safe situation.Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Crash barriersBrackets

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchoring depths and the simple installation, the bolt anchor FAZ II Plus GS can be used in a particularly flexible way. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut gives not only an attractive finish, but also accident-free installation thanks to its rounded shape. Features Fast and simple installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives a safe situation.Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchoring depth allows millimetre-accurate adaptation to the load. Applications Crash barriersBrackets

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchorage depths and easy installation, the bolt anchor FAZ II Plus GS can be used very flexibly. The proven expansion segment transfers the loads safely into the concrete and provides maximum load-bearing capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut not only gives an attractive finish, but also ensures accident-free installation thanks to its rounded shape. Features Quick and easy installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24, with and without the filling washer FFD.Adjustment to the loads to the millimetre through the variable anchorage depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides a safe situation.Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Crash barriersBrackets