ZYKON hammerset anchor FZEA II

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Undercut hole without changing tools. This saves time and costs.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Made of stainless steel for outdoor fixings.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Undercut hole without changing tools. This saves time and costs.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The ZYKON undercut hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and extremely corrosion-resistant steel. The hammerset anchor with its shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercut anchor is set using the time-saving pre-positioned installation. The setting tool FZED Plus pushes the expansion sleeve over the cone. This completely fills the undercut drill hole. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Quick hammer installation.Maximum safety through a form-fit connection.High degree of flexibility through the use of common metric bolts and threaded rods.Made of extremely corrosion-resistant steel for corrosive conditions.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with ZYKON undercut technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be set easily and without effort.The special drill FZUB allows quick installation by creating the undercut without having to change tools.The setting tool leaves a visual mark on the sleeve if it is installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small spacings and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler systemsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Made of stainless steel for outdoor fixings.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Undercut hole without changing tools. This saves time and costs.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Made of stainless steel for outdoor fixings.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings