FISCHER EA II M10X40 R
Product information "FISCHER EA II M10X40 R"
Features
- Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.
- Use of common metric bolts and threaded rods reduces complexity.
- Effort-saving series installation with the machine setting tool EA II S-SDS.
- ETA approval for non-cracked concrete.
- Made of stainless steel for outdoor fixings.
Advantages
- The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.
- The metric internal thread makes it possible to use standard metric bolts or threaded rods.
- The EMS setting tool allows effortless installation, especially in series installation.
- When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.
- The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.
- Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm.
Applications
- Pipework and ventilation systems
- Sprinkler systems
- Cable trays and wires
- Lattice work
- Steel structures
- Machines
- Brackets
- Formwork props
| Application environment: | Outdoor |
|---|---|
| Certification: | Fire classification |
| Installation method: | Pre-positioned installation |
| Material: | Stainless steel |
| Surface protection: | None (untreated) |
| Thread size: | M10 |
Matching parts (M10)
The fischer threaded rod G A2 is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or upright element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Stainless steel A2 for a corrosive environment.Simple installation. Applications For indoor and outdoor applications and in environments with high corrosion stress on parts.Not suitable for use in environments with chlorine.
Log in to see prices
The fischer threaded rod G A4 is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Stainless steel A2 for a heavily corrosive environment.Simple installation.Ideal for fischer installation systems. Applications For indoor and outdoor applications and in environments where parts are under high stress from corrosion.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of stainless steel A4.Easy installation.Ideal for fischer installation systems.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of stainless steel A4.Easy installation.Ideal for fischer installation systems.
Log in to see prices
The fischer hex nut MU is a fastening element made of stainless steel A4. It is used to fasten various fastening elements of the fischer installation system to each other. Features For threaded rods and hex screws.Made of stainless steel A4. Applications For applications indoors and outdoors and in environments with high corrosion stress on components.
Log in to see prices