FISCHER EA II M6X30 R
Fischer
Product information "FISCHER EA II M6X30 R"
The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole.
Features
- Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.
- Use of common metric bolts and threaded rods reduces complexity.
- Effort-saving series installation with the machine setting tool EA II S-SDS.
- ETA approval for non-cracked concrete.
- Made of stainless steel for outdoor fixings.
Advantages
- The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.
- The metric internal thread makes it possible to use standard metric bolts or threaded rods.
- The EMS setting tool allows effortless installation, especially in series installation.
- When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.
- The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.
- Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm.
Applications
- Pipework and ventilation systems
- Sprinkler systems
- Cable trays and wires
- Lattice work
- Steel structures
- Machines
- Brackets
- Formwork props
| Application environment: | Outdoor |
|---|---|
| Certification: | Fire classification |
| Installation method: | Pre-positioned installation |
| Material: | Stainless steel |
| Surface protection: | None (untreated) |
| Thread size: | M6 |