FISCHER FFP-MD4-V2 FIXED POINT MEDIUM
Fischer
Product information "FISCHER FFP-MD4-V2 FIXED POINT MEDIUM"
The medium fixed points in variable design prevent unwanted movement between pipes and structures in hot or cold water pipes. They direct the thermally induced expansion of the pipes in the desired direction. The variable fixed points FFP-M make it possible to adjust the hanging height to the position of the pipe. They are supported on one or both sides with threaded rods. The FFP-M and FFP-M2 can be fitted with the FFSC fixed point clamp as well as the FFRC refrigeration fixed clamp. The galvanised version is suitable for installations in buildings.
Features
- Variable distance up to 500 mm.
- Simple installation with the same tools.
- Axially and laterally adjustable bracing.
- Different or unknown forces are possible.
- Recommended pipe diameter ≤ 355.6 mm.
Advantages
- The supports and braces on one side of the variable fixed point allow adjustment to the distance between the pipe and the substrate.
- The fixed points consist of components with matching thread sizes and plug holes, so simple installation with the same tools is possible.
- The height adjustment of the fixed point allows precise adjustment to installed pipes and so guarantees safe functioning of the fixed point.
- The axially and laterally adjustable bracing angles make it possible to adapt the connection to the substrate to the conditions on site and simplify installation.
Applications
- Heating pipes
- Refrigeration pipes
- Steam pipes
- Hot water and circulation pipes
- Media lines with thermal expansion
| Load level: | Medium |
|---|---|
| Material: | Electro-galvanised steel, Steel |
| Product line: | FFP |
| Surface protection: | Electro-galvanised |