FISCHER FRSK 32-35
Product information "FISCHER FRSK 32-35"
Features
- The insulation material resists ageing and gives consistent performance over the long term.
- The connecting nut with double thread guarantees flexibility on site.
- The integrated load distribution plate transfers the load and allows higher loads.
- Easy adjustment to the pipe diameter thanks to the variable clamping range and the two-screw design.
Advantages
- The variable clamping range and the two-screw design allow easy adjustment to the pipe diameter.
- The two-part clamp is self-adhesive and so gives excellent insulating values.
- The insulation material resists ageing, so the FRSK gives consistent performance over the long term.
- The connecting nut with double thread guarantees flexibility on site.
- The screws are secured against falling out, which makes installation easy.
- The integrated load distribution plate transfers the load and allows higher loads.
Applications
- Installation of pipes in refrigeration and air-conditioning systems
| Clamping range: | 21 - 40 mm |
|---|---|
| Insulation inlay: | Cold insulation |
| Load level: | Medium |
| Material: | Rubber / insulation, Steel |
| Max. load (kN): | < 1 kN |
| Nominal size: | 1 |
| Product line: | FRSK |
| Suitable for pipe type: | Aluminium pipe, Cast iron pipe, Copper pipe, Plastic pipe, Spiral duct, Stainless steel pipe, Steel pipe, Thin-walled pipe |
| Surface protection: | Electro-galvanised |
| Thread size: | M8, M10 |
Matching parts (M8 and M10)
The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.
Log in to see prices
The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.
Log in to see prices
The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.
Log in to see prices
The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.
Log in to see prices
The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Galvanised.Simple installation.Ideal for fischer installation systems. Applications For use in dry indoor spaces.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Galvanised.Simple installation.Ideal for fischer installation systems. Applications For use in dry indoor spaces.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Galvanised.Simple installation.Ideal for fischer installation systems. Applications For use in dry indoor spaces.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Galvanised.Simple installation.Ideal for fischer installation systems. Applications For use in dry indoor spaces.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Galvanised.Simple installation.Ideal for fischer installation systems. Applications For use in dry indoor spaces.
Log in to see prices
The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Galvanised.Simple installation.Ideal for fischer installation systems. Applications For use in dry indoor spaces.
Log in to see prices
The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork
Log in to see prices
The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork
Log in to see prices
The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork
Log in to see prices
The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork
Log in to see prices
The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork
Log in to see prices
The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork
Log in to see prices
The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.
Log in to see prices
The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.
Log in to see prices