FISCHER FRSM 348-356" M16
Product information "FISCHER FRSM 348-356" M16"
Features
- With two screws for optimal adjustment to the pipe diameter
- Screw loss protection.
- Nut with M16 thread.
- Sound-insulating material.
Advantages
- The tests under high load guarantee the reliability of the FRSM.
- The connecting nut with combination M10/M12, M12/M16 or M16 thread allows optimal stock management.
- From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fixing cast iron roof drainage pipes.
- The system with two screws allows optimal adjustment to the outer diameter of the pipe.
- The screws cannot be lost, which guarantees trouble-free installation.
Applications
- Fixing of medium-heavy to heavy pipelines with threaded rods or stud screws or for large spans
| Clamping range: | > 300 mm |
|---|---|
| Insulation inlay: | Sound insulation |
| Load level: | Heavy |
| Material: | Electro-galvanised steel, Steel |
| Max. load (kN): | 5 - 10 kN |
| Product line: | FRSM |
| Suitable for pipe type: | Aluminium pipe, Cast iron pipe, Copper pipe, Plastic pipe, Spiral duct, Stainless steel pipe, Steel pipe, Thin-walled pipe |
| Surface protection: | Electro-galvanised |
| Thread size: | M16 |
Matching parts (M16)
The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.
Log in to see prices
The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.
Log in to see prices
The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork
Log in to see prices
The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.
Log in to see prices