Mounting angle MW

The fischer construction elements Mounting angle MW 90° and MWU 90°, together with the channel nut FSM Clix P, give exactly fitting and simple connections of channels to each other or to the substrate. The special fixing tabs allow the MW 90° to be placed correctly both lengthways and crossways to the FLS channel profile. The MWU can be fastened directly to the substrate, saving space. To suit the FSM Clix P 8 and the plugs with an outer diameter of 8 mm, the MW and MWU angles have a hole with a diameter of 8.5 mm. The galvanised version is suitable for installations in buildings. Features Simple creation of structures in combination with FUS channels and FCN Clix P channel nutsCorrosion protection by galvanisingFor use in dry indoor areas Advantages The characteristic locking clamps of the Mounting angle MW 90° guarantee a stable fit on all sides of the profile.The long slotted hole on the flat side of the Mounting angle MWU 90° allows a firm connection to the substrate.The standardised holes in the Mounting angle allow an exact connection to FLS profiles in combination with click nut FSM Clix P and bolt. Applications Setting up simple structures with the help of the sliding nut FSM Clix P

With the mounting block MV for a flexible connection, a maximum of 3 pipe clamps can be installed at one fixing point. The model with four M8 internal threads has room for 4 threaded rods for fastening 3 pipe clamps and the connection to the substrate. Features Flexible coupling of pipe clamps or fixings.Fastening of a maximum of three pipes. That saves costs.Made of extremely sturdy die-cast metal.With M8 seat. Advantages The design of the mounting block gives flexibility when connecting pipe clamps or threaded rods.The mounting block allows installation of 3 pipelines at the same time. Applications Block with four threaded holes for a simple connectionIdeal for connecting threaded rods and bolts at an angle of 90°