All products

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads and a wide range of applications. The steel anchor can fix heavy loads in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete. It allows a high load capacity that can be loaded immediately, even in dynamic applications. This makes the steel anchor very suitable for anchoring railings, heavy cable trays and brackets, and also for dynamic loads such as lifting platforms, conveyor belts and pumps. Features Fast and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first M6 segment anchor with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The extra long cap nut is specially developed for use with the bolt anchor FAZ II Plus and is very suitable for attractively designed applications, for example anchoring handrails in visible areas. The cap nut not only allows a refined visual design, but also ensures accident-free installation because of its rounded shape. Advantages The cap nut is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation.Can be combined with the bolt anchor FAZ II Plus in accordance with the certification.

The extra long cap nut is specially developed for use with the bolt anchor FAZ II Plus and is very suitable for attractively designed applications, for example anchoring handrails in visible areas. The cap nut not only allows a refined visual design, but also ensures accident-free installation because of its rounded shape. Advantages The cap nut is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation.Can be combined with the bolt anchor FAZ II Plus in accordance with the certification.

The extra long cap nut is specially developed for use with the bolt anchor FAZ II Plus and is very suitable for attractively designed applications, for example anchoring handrails in visible areas. The cap nut not only allows a refined visual design, but also ensures accident-free installation because of its rounded shape. Advantages The cap nut is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation.Can be combined with the bolt anchor FAZ II Plus in accordance with the certification.

The extra long cap nut is specially developed for use with the bolt anchor FAZ II Plus and is very suitable for attractively designed applications, for example anchoring handrails in visible areas. The cap nut not only allows a refined visual design, but also ensures accident-free installation because of its rounded shape. Advantages The cap nut is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation.Can be combined with the bolt anchor FAZ II Plus in accordance with the certification.

The FMBC beam clamp is ideal for connecting wall brackets FMC or saddle flanges FMSF to steel beams. The design of the FMBC beam clamp M12 and M16 makes it possible to fix base plates of the FMS system to steel beams without drilling or welding. Thanks to the large clamping range of the FMBC beam clamp M12 and M16, it can be fixed to all common steel beams. Features The design of the FMBC beam clamp M12 and M16 makes it possible to fix base plates to steel beams without drilling or welding.The large clamping range of the FMBC beam clamp M12 and M16 makes it possible to fix it to all common beam flanges.The solid design of the FMBC beam clamps M12 and M16 guarantees a high load capacity for the structure. Advantages The design of the FMBC beam clamp M12 and M16 makes it possible to fix steel beams without drilling or welding.The large clamping range of the FMBC beam clamp M12 and M16 makes it possible to fix it to all common beam flanges.The design of the FMBC beam clamp gives fast installation and easy repositioning of the FMS profiles or FMSF base plates for adjustment. Applications Simple fixing by clamping the base plate onto the steel beamsFor fixing FMSF S and FMSF BP S, use FMBC M12. For FMSF and FMSF BP M and L, use FMBC M16

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)

The channel bracket FCA allows quick and simple installation of, for example, pipe trays along the wall. The bracket is also very suitable as a support arm for air ducts and cable trays. Simple alignment of the bracket through holes with slots in the base plate, which are turned 90° to each other. Features Fire inspection report in accordance with MLAR/EN 13501.For installing pipe systems, air ducts and cable trays.Stable base plate with vertical and horizontal slotted hole.Serration in the channel gives channel nuts a firm grip. Advantages The fire inspection report in accordance with MLAR/EN13501 guarantees independently verified safety.Thanks to the large range of different lengths, optimum matching to the application is possible.The stable base plate of the bracket gives reliable support for loaded structures.The slotted holes in the base plate, which are turned 90° to each other, allow simple alignment of the bracket.The stamped serration in the channel gives channel nuts a good grip to take high shear loads, e.g. in vertical installation. Applications Quick and simple installation of pipelines (for example along the wall)