All products

The high-quality channel FUS is a U-shaped profile with which horizontal and vertical structures can be built solidly. It allows quick and efficient fastening of pipes and supporting structures. The shape of the profile allows the use of the complete range of accessories. The internal serration in the channel guarantees an extremely strong and safe connection. The different thicknesses allow optimum matching to the required loads. The scale on the side of the channel simplifies cutting to length. Slotted holes of 30 x 14 mm, placed every 50 mm, make fastening easier. Features Serration in the channel guarantees an extremely strong and safe connection.Scale on the side of the channel simplifies cutting to length.Slotted holes every 50mm make fastening easier. Advantages The independent fire certification in accordance with MLAR/EN13501 guarantees maintenance of function in case of fire.Available in different lengths, thicknesses and sizes that increase in steps.A very sturdy base plate creates a solid connection between substrate and structure.The slotted holes in the base plate are at right angles to each other, so the wall bracket can be aligned easily.Scale on the side of the channel simplifies cutting to length.The internal serration in the channel guarantees an extremely strong and safe connection. Applications Safe horizontal and vertical installationsQuick and efficient fastening of pipelines and supporting structures

The fischer cross connector FVS is a connecting piece for making a grid from a fischer channel FUS 62D in the length direction and a fischer channel FUS 62 in the width direction. This makes it easy to create an installation grid and saves time. fischer offers the cross connector as a 3-sided and 4-sided element. For ceiling suspension, the FVS is supplemented with an M12 threaded rod, M12 nut and FCN Clix P12; for height adjustment, it is supplemented with the turnbuckle SPS / BLR. The galvanised zinc version is suitable for installation in buildings. Features For making installation grids with FUS channelsSuitable for FUS channels 41, 21D, 62, 41DSimple installation Advantages The construction of the cross connector allows an installation grid to be built simply and in less time.The upward-open support of the cross beams in the cross connector allows installation by one installer.The construction of the FVS 3 guarantees a stable installation. Applications Cross connectors for installing an installation grid using FUS channelsCeiling suspension using threaded rodsFUS channels in the length direction: FUS 62DFUS channels in the cross direction: FUS 41, FUS 21D, FUS 62, FUS 41D

The fischer cross connector FVS is a connecting piece for making a grid from a fischer channel FUS 62D in the length direction and a fischer channel FUS 62 in the width direction. This makes it easy to create an installation grid and saves time. fischer offers the cross connector as a 3-sided and 4-sided element. For ceiling suspension, the FVS is supplemented with an M12 threaded rod, M12 nut and FCN Clix P12; for height adjustment, it is supplemented with the turnbuckle SPS / BLR. The galvanised zinc version is suitable for installation in buildings. Features For making installation grids with FUS channelsSuitable for FUS channels 41, 21D, 62, 41DSimple installation Advantages The construction of the cross connector allows an installation grid to be built simply and in less time.The upward-open support of the cross beams in the cross connector allows installation by one installer.The construction of the FVS 3 guarantees a stable installation. Applications Cross connectors for installing an installation grid using FUS channelsCeiling suspension using threaded rodsFUS channels in the length direction: FUS 62DFUS channels in the cross direction: FUS 41, FUS 21D, FUS 62, FUS 41D

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Undercut hole without changing tools. This saves time and costs.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Made of stainless steel for outdoor fixings.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Undercut hole without changing tools. This saves time and costs.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The ZYKON undercut hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and extremely corrosion-resistant steel. The hammerset anchor with its shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercut anchor is set using the time-saving pre-positioned installation. The setting tool FZED Plus pushes the expansion sleeve over the cone. This completely fills the undercut drill hole. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Quick hammer installation.Maximum safety through a form-fit connection.High degree of flexibility through the use of common metric bolts and threaded rods.Made of extremely corrosion-resistant steel for corrosive conditions.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with ZYKON undercut technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be set easily and without effort.The special drill FZUB allows quick installation by creating the undercut without having to change tools.The setting tool leaves a visual mark on the sleeve if it is installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small spacings and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler systemsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Made of stainless steel for outdoor fixings.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Undercut hole without changing tools. This saves time and costs.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The undercutting ZYKON hammerset anchor FZEA II is a hammerset anchor with internal thread, made of galvanised, stainless and highly corrosion-resistant steel. The hammerset anchor with the shallow setting depth is suitable for single fixings in cracked and non-cracked concrete, both indoors and outdoors. In one working cycle, the undercut drill hole is drilled with the special drill FZUB. The undercutting anchor is installed using the time-saving pre-positioned installation. With the setting tool FZED Plus, the expansion sleeve is pressed over the cone. It fills the undercut drill hole completely. The ETA approval and fire suitability in accordance with fire resistance class R 120 offer much more safety. Features Fast impact installation.Maximum safety thanks to a form-fit connection.A high degree of flexibility through the use of common metric bolts and threaded rods.Made of stainless steel for outdoor fixings.ETA approval for cracked concrete and fire resistance class R 120. Advantages The hammerset anchor with undercutting ZYKON technology for single fixing in cracked and non-cracked concrete.Thanks to the conical undercut in the concrete, the anchor can be placed easily and without effort.The special drill FZUB allows fast installation by making the undercut without the need to change tools.The setting tool leaves a visual mark on the sleeve if it has been installed correctly.The virtually expansion-pressure-free installation of the anchor allows very small centre-to-centre and edge distances, so this anchor can be used widely. Applications PipelinesVentilation ductsSprinkler installationsCable traysSuspended ceilings

The construction elements FZF and FUF are channel brackets for making cross connections with the FUS channels. The channel brackets are fastened with the T-head bolt FCN Clix P. The range consists of channel brackets for FUS 21, 41 and 62 channels. The galvanised version is suitable for installations in buildings; the hot-dip galvanised and stainless steel versions are intended for outdoor installations or in highly corrosive environments. Features Simple production of cross connections in combination with FUS channels and FCN Clix P T-head nuts. Advantages The different shapes of the connecting elements give extra flexibility when installing channel structures.The holes in the connecting elements guarantee compatibility with FCN Clix P. Applications Installation elements for building multidimensional channel structures

The construction elements FZF and FUF are channel brackets for making cross connections with the FUS channels. The channel brackets are fastened with the T-head bolt FCN Clix P. The range consists of channel brackets for FUS 21, 41 and 62 channels. The galvanised version is suitable for installations in buildings; the hot-dip galvanised and stainless steel versions are intended for outdoor installations or in highly corrosive environments. Features Simple production of cross connections in combination with FUS channels and FCN Clix P T-head nuts. Advantages The different shapes of the connecting elements give extra flexibility when installing channel structures.The holes in the connecting elements guarantee compatibility with FCN Clix P. Applications Installation elements for building multidimensional channel structures

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G A4 is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Stainless steel A2 for a heavily corrosive environment.Simple installation.Ideal for fischer installation systems. Applications For indoor and outdoor applications and in environments where parts are under high stress from corrosion.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Continuous thread over the entire lengthCorrosion protection through hot-dip galvanisingFor indoor and outdoor use Applications For indoor and outdoor use.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.