All products

The fischer spiral duct hanger LRBN is a fixing part with a sound-insulating element, in riveted and inserted version, for hanging spiral ducts with threaded rods. The sound-insulating element reduces the transfer of vibration and flow noise. Thanks to the various drill holes in the ventilation duct clamp, simple fixing with drilling screws or nails is possible. The through hole in the ventilation duct clamp allows simple alignment and height adjustment of the fixing. The riveted version gives the ventilation duct clamp extra strength. By setting the bending point, optimum adaptation to the pipe diameter is possible. Features Sound-insulating elementNut with combination thread M8/M10. Advantages The various holes in the ventilation duct clamps allow simple and fast fixing with self-drilling screws or rivets.The sound-damping element of the ventilation duct clamp reduces the transfer of vibration and flow noise.The through hole in the ventilation duct clamps allows simple alignment and height adjustment of the threaded rod.The riveted version gives the ventilation duct clamps more stability.The specific shape of the ventilation duct clamp allows ideal adaptation to the pipe diameter.The design of the LRN / LRNB offers an alternative application as a sound-damping profile clamp. Applications Fixing part with sound damping in riveted or inserted version

The fischer hole stamp LST is an attachment for the fischer hole punch LZ. This is a tool for punching holes in trapezoidal sheets and trapezoidal ceilings. Features Robust design. Advantages The hole punch LZ is easy to use in every application.Because of the long lever, only little force is needed.The punching tools LZ and LST are interchangeable. Applications Tool for punching holes in steel plates

The fischer hole stamp LZ is a tool for stamping holes in trapezoidal sheets and trapezoidal ceilings. Features A long lever makes punching the holes easier.Exchangeable punches extend the service life of the trapezoidal sheet pliers. Advantages The hole punch LZ is easy to use, in every application.Because of the long lever, only little force is needed.The punching tool LZ and LST are interchangeable. Applications Tool for punching holes in steel sheets

The fischer pipe clamp FRS is a two-screw pipe clamp made of zinc-plated steel in material grade DD11 with an M8/M10 combination connection thread. The two-screw design allows optimum adjustment to the outer diameter of the pipe. Together with the combined connection thread, this increases flexibility. This means that pipes with an outer diameter of 12 to 168 mm can be fixed safely with a threaded rod or set screw indoors, in line with the fire safety requirements of fire resistance class R 120 and MLAR. With a chlorine-free and silicone-free sound insulation insert, the pipe clamp meets the requirements of DIN 4109. The fischer FRS is suitable for applications in the temperature range from -40°C to +100°C. Features Sound-insulating material.With two screws for optimum adjustment to the pipe diameterScrew loss protection.Fire safety approval R120. Advantages The fire inspection report guarantees independently verified safety.The two-screw system allows optimum adjustment to the outer diameter of the pipe.The connecting nut with combined M8/M10 thread gives flexibility on site.The sound-damping inlay guarantees sound damping and prevents contact corrosion.The screws cannot be lost, which guarantees trouble-free installation. Applications Safe fixing of pipes with threaded rods or stud screws, also where fire safety requirements are strict

The fischer construction elements Mounting angle MW 90° and MWU 90°, together with the channel nut FSM Clix P, give exactly fitting and simple connections of channels to each other or to the substrate. The special fixing tabs allow the MW 90° to be placed correctly both lengthways and crossways to the FLS channel profile. The MWU can be fastened directly to the substrate, saving space. To suit the FSM Clix P 8 and the plugs with an outer diameter of 8 mm, the MW and MWU angles have a hole with a diameter of 8.5 mm. The galvanised version is suitable for installations in buildings. Features Simple creation of structures in combination with FUS channels and FCN Clix P channel nutsCorrosion protection by galvanisingFor use in dry indoor areas Advantages The characteristic locking clamps of the Mounting angle MW 90° guarantee a stable fit on all sides of the profile.The long slotted hole on the flat side of the Mounting angle MWU 90° allows a firm connection to the substrate.The standardised holes in the Mounting angle allow an exact connection to FLS profiles in combination with click nut FSM Clix P and bolt. Applications Setting up simple structures with the help of the sliding nut FSM Clix P

The fischer mounting angle MW 90° Clix allows a perfectly fitting connection to the channel FLS. The mounting angle can be installed quickly thanks to the click bolt with 90° rotation. The spring element in the T-head bolt allows exact positioning in the channels. Features Easy making of channel constructions in combination with FLS channels.Corrosion protection through galvanising.For use in dry indoor spaces. Advantages Pre-assembled accessories such as the SF Clix reduce the number of items for a connection and guarantee time-saving installation.The pre-assembled connector of the MW Clix secures the installation position thanks to the unique pressure block and guarantees safe and fast installation. The specially developed spring leg on the pre-assembled connector guarantees the necessary contact pressure of the connector on the channel and ensures secure positioning during installation.The form-fitting and precisely fitting angle bracket of the MW Clix allows simple installation of the FLS channel and saves valuable installation time. Applications Element for the stable build-up of angle connections with FLS channels.For use in dry indoor spaces.

The structural elements fischer universal brackets MW 90° and MWU 90°, together with the channel nut FSM Clix P, provide exactly fitting and easy connections of channels to each other or to the substrate. The special fixing lugs allow the MW 90° to be placed correctly both lengthwise and crosswise to the FLS channel. The MWU can be fixed directly to the substrate, saving space. The MW and MWU angles have a hole with a diameter of 8.5 mm to match the FSM Clix P 8 and plugs with an outer diameter of 8 mm. The galvanised version is suitable for installations in buildings. Features Easy creation of structures in combination with FUS channels and FCN Clix P channel nutsCorrosion protection through galvanisingFor use in dry indoor spaces Advantages The long slot on the flat flange of the MWU 90° angle bracket allows a direct connection to the substrate for space-saving fixing.The standardised holes in the angle brackets allow an exact connection to the FLS channels using FSM Clix P and a screw. Applications Connecting element for making simple channel structures with the channel nut FSM Clix P.For use in dry indoor spaces.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.

The fischer hex nut MU is a fastening element made of stainless steel A4. It is used to fasten various fastening elements of the fischer installation system to each other. Features For threaded rods and hex screws.Made of stainless steel A4. Applications For applications indoors and outdoors and in environments with high corrosion stress on components.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.

The fischer hex nut MU is a fastening element made of stainless steel A4. It is used to fasten various fastening elements of the fischer installation system to each other. Features For threaded rods and hex screws.Made of stainless steel A4. Applications For applications indoors and outdoors and in environments with high corrosion stress on components.

The fischer hex nut MU is a fastening element made of hot-dip galvanised steel. It is used to fasten various fastening elements of the fischer installation system to each other. Features Hex nut for universal use.Application-specific corrosion protection by hot-dip galvanised surface. For indoor and outdoor use. Applications For indoor and outdoor application.

The fischer hex nut MU is a fastening element made of hot-dip galvanised steel. It is used to fasten various fastening elements of the fischer installation system to each other. Features Hex nut for universal use.Application-specific corrosion protection by hot-dip galvanised surface. For indoor and outdoor use. Applications For indoor and outdoor application.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.

The fischer hex nut MU is a fastening element made of hot-dip galvanised steel. It is used to fasten various fastening elements of the fischer installation system to each other. Features Hex nut for universal use.Application-specific corrosion protection by hot-dip galvanised surface. For indoor and outdoor use. Applications For indoor and outdoor application.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.

The fischer hex nut MU is a fastening element made of stainless steel A4. It is used to fasten various fastening elements of the fischer installation system to each other. Features For threaded rods and hex screws.Made of stainless steel A4. Applications For applications indoors and outdoors and in environments with high corrosion stress on components.

The fischer hex nut MU is a fastening element made of hot-dip galvanised steel. It is used to fasten various fastening elements of the fischer installation system to each other. Features Hex nut for universal use.Application-specific corrosion protection by hot-dip galvanised surface. For indoor and outdoor use. Applications For indoor and outdoor application.

With the mounting block MV for a flexible connection, a maximum of 3 pipe clamps can be installed at one fixing point. The model with four M8 internal threads has room for 4 threaded rods for fastening 3 pipe clamps and the connection to the substrate. Features Flexible coupling of pipe clamps or fixings.Fastening of a maximum of three pipes. That saves costs.Made of extremely sturdy die-cast metal.With M8 seat. Advantages The design of the mounting block gives flexibility when connecting pipe clamps or threaded rods.The mounting block allows installation of 3 pipelines at the same time. Applications Block with four threaded holes for a simple connectionIdeal for connecting threaded rods and bolts at an angle of 90°

The fischer damper PA 30 x 30 is an installation element for sound-insulating installation of air conditioning units or pumps on fischer channels. The pre-assembled elements are slid into the channel profile. The objects to be fastened are then fixed with the threaded rod. Features Prevents noise emission.Ideal for the fischer KSU fixing set. Advantages The KSU-S kit contains 4 rubber couplings that give optimised noise reduction.The horizontal channels in different lengths and the SM sliding nut allow flexible adjustment of the rubber couplings for easy installation.The supplied T-head bolts for fastening the wall channel brackets give an adjustment option and time-saving installation.The KSU set consists of channels already cut to size and is ready for immediate installation, which is ready for instant use and avoids the accumulation of single pieces. Applications For safely fastening air conditioning installations, pumps and fans to walls, with or without sound-damping elements

The fischer Pendulum hanger PDH is a single fixing with flexible swivel action for absorbing changes in the length of pipes in all directions. For movable pipes, the pendulum hangers must be installed in pairs. Because of the shape of the pendulum hanger, it can be rotated through 360°. Precise height adjustment with the help of the screw sleeve. Features Maximum pendulum angle 12°.(PDH M10 - M12) Approval "Muster-Leitungsanlagen-Richtlinien" (German guideline for piping systems) MLAR F30. Advantages The design of the pendulum hanger offers a degree of freedom of 360°.The screw-in sleeve of the pendulum hanger allows good height adjustment.Thanks to the max. swivel angle of 12°, large expansions can be absorbed.The setting depth of the threaded bolts guarantees a high tensile load. Applications Single fixing for absorbing changes in the length of pipelines in all directions.For movable pipes, the pendulum hangers must be installed in pairs, for safe guidance without tilting.Secure threaded rods with a lock nut so that they cannot come loose.

The fischer Pendulum hanger PDH is a single fixing with flexible swivel action for absorbing changes in the length of pipes in all directions. For movable pipes, the pendulum hangers must be installed in pairs. Because of the shape of the pendulum hanger, it can be rotated through 360°. Precise height adjustment with the help of the screw sleeve. Features Maximum pendulum angle 12°.(PDH M10 - M12) Approval "Muster-Leitungsanlagen-Richtlinien" (German guideline for piping systems) MLAR F30. Advantages The design of the pendulum hanger offers a degree of freedom of 360°.The screw-in sleeve of the pendulum hanger allows good height adjustment.Thanks to the max. swivel angle of 12°, large expansions can be absorbed.The setting depth of the threaded bolts guarantees a high tensile load. Applications Single fixing for absorbing changes in the length of pipelines in all directions.For movable pipes, the pendulum hangers must be installed in pairs, for safe guidance without tilting.Secure threaded rods with a lock nut so that they cannot come loose.