Installation technology

Applications 90° angle connector for connecting channel profiles and installing reinforcing elements

The threaded rod connector S-ROD makes it possible to brace suspended threaded rods and support structures with M10 threaded rods seismically in all directions. Thanks to the well-thought-out design, the installation height can be adjusted quickly and easily. Several S-ROD threaded rod connectors can be fitted on top of each other to brace the same point in several directions and so increase safety further. The S-ROD can be installed afterwards without problems and without dismantling existing structures. Features The design of the threaded rod bracing connector allows variable installation at angles from 30° to 65°.The threaded rod connector can be fitted quickly and easily without having to dismantle existing installations.By tilting the side rod 90°, the threaded rod connector slides smoothly along the vertical threaded rod, which allows quick and easy height adjustment. Advantages The design of the threaded rod bracing connector allows a variable angle of inclination from 30° to 65° when fixing.The threaded rod bracing connector can be fitted quickly and easily without having to dismantle existing installations.By tilting the side rod 90°, the connector slides smoothly over the vertical threaded rod, which allows quick and easy height adjustment.Several threaded rod bracing connectors can be fitted on top of each other to brace the same point in different directions. Applications For bracing both new and already installed threaded rods and support structures with M10 threaded rods, in combination with the S-VA clamping element.

The threaded rod brace connector S-VA makes it possible to reinforce suspended threaded rods and supporting structures with threaded rods. The holder for the tensioning part allows the threaded rod with pre-assembled nut to be positioned quickly. For extra safety, two brace connectors can be mounted on top of each other, so that bracing in several directions is possible from one point. Features The design of the brace connector S-VA allows variable fixing at angles from 30° to 65°, for flexible adaptation to both new and existing structures.The shape of the tensioning part allows simple and quick installation of a pre-assembled threaded rod with nut.The geometry of the tensioning part guarantees centred force transfer for a safe fixing. Advantages The design of the brace connector S-VA allows variable fixing at angles from 30° to 60°, which gives flexible adaptation to both new and existing structures.The shape of the tensioning part allows quick and simple installation of a pre-assembled threaded rod with nut.The option of mounting two brace connectors on top of each other makes it possible to clamp one fixing point in several directions. Applications For reinforcing new and already installed supporting structures with threaded rods M10.Suitable for use in dry indoor areas.

The tension bracket S-VB allows reinforcement of load-bearing structures with channel profiles.Thanks to the well-thought-out design, the channel profile can be slid in quickly.For extra safety, two tension brackets can be mounted on top of each other, so that one fixing point can be reinforced in several directions. Features The design of the tension bracket S-VB allows variable fixing at angles from 30° to 65°, for flexible adaptation to the existing structure.The lamellae bent up and down allow simple installation of the channel profile on the tension bracket.The option of mounting two tension brackets on top of each other offers the possibility of clamping one fixing point in several directions. Advantages The design of the tension part S-VB allows a variable angle of inclination from 30° to 65° for flexible installation of the reinforcement.The lamellae bent up and down ensure that channel profiles can be positioned easily in a wide range of installation situations.The option of mounting two tension parts on top of each other offers the possibility of reinforcing one fixing point in several directions. Applications For reinforcing both new and already installed load-bearing structures with installation systems.

The shaped reinforcement strut SAE offers very high stability and safety to a load-bearing structure by also carrying seismic loads. The design of the strut ensures a safe connection with FUS channel profiles and FCA brackets thanks to an exact fit. Features Thanks to the L-shape, the reinforcement can be fixed not only horizontally but also vertically.The stably shaped reinforcement strut ensures very high stability and safety of a load-bearing structure. Advantages Thanks to the L-shape, the reinforcement can be fixed not only horizontally but also vertically.The stably shaped reinforcement strut ensures very high stability and safety of a load-bearing structure. Applications Seismic reinforcement of truss structures with FUS channels and FCA cantilevers.For use in dry indoor areas.

The shaped reinforcement strut SAE offers very high stability and safety to a load-bearing structure by also carrying seismic loads. The design of the strut ensures a safe connection with FUS channel profiles and FCA brackets thanks to an exact fit. Features Thanks to the L-shape, the reinforcement can be fixed not only horizontally but also vertically.The stably shaped reinforcement strut ensures very high stability and safety of a load-bearing structure. Advantages Thanks to the L-shape, the reinforcement can be fixed not only horizontally but also vertically.The stably shaped reinforcement strut ensures very high stability and safety of a load-bearing structure. Applications Seismic reinforcement of truss structures with FUS channels and FCA cantilevers.For use in dry indoor areas.

The fischer sprinkler loop hanger FRSP is an installation element for fixing sprinkler pipes. The sprinkler loop hanger is made of high-quality steel Q235B. A zinc coating protects against corrosion. The fischer sprinkler loop hanger is adjusted in height with the adjusting nut. Features Simple height adjustment after installation.Resistant to corrosion. Advantages For simple installation of sprinkler pipes from 1/2" to 8" for a wide range of applications.Simple installation by inserting the pipes, hanging them and adjusting them. Saves time during installation.Simple height adjustment by means of a height-adjustable connection nut.The sprinkler clamp has FM and UL approval for safe use. Applications Installation of sprinkler pipesUsed for hanging stationary, non-insulated pipes

The fischer beam clamp TKLS Steel Bite is an efficient fixing solution for steel beams without welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, in particular for sprinkler pipes too. It is secured with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM give optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are intended for outdoor installations or very corrosive environments. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite stop it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with a sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The fischer beam clamp TKLS Steel Bite is an efficient fixing solution for steel beams without welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, in particular for sprinkler pipes too. It is secured with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM give optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are intended for outdoor installations or very corrosive environments. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite stop it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with a sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The fischer beam clamp TKLS Steel Bite is an efficient fixing solution for steel beams without welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, in particular for sprinkler pipes too. It is secured with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM give optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are intended for outdoor installations or very corrosive environments. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite stop it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with a sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The fischer beam clamp TKLS Steel Bite is an efficient fixing solution for steel beams without welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, in particular for sprinkler pipes too. It is secured with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM give optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are intended for outdoor installations or very corrosive environments. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite stop it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with a sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The fischer beam clamp TKLS Steel Bite is an efficient fixing solution for steel beams without welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, in particular for sprinkler pipes too. It is secured with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM give optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are intended for outdoor installations or very corrosive environments. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite stop it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with a sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm