Heavy duty pipe clamp FRSM - metric

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a pipe clamp with two bolts made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the combination connecting thread, flexibility is increased. Pipelines with an outer diameter of 19 - 508 mm can therefore be safely fixed indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimal adjustment to the pipe diameterScrew loss protection.Nut with M16 thread.Sound-insulating material. Advantages The tests under high load guarantee the reliability of the FRSM.The connecting nut with combination M10/M12, M12/M16 or M16 thread allows optimal stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fixing cast iron roof drainage pipes.The system with two screws allows optimal adjustment to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of medium-heavy to heavy pipelines with threaded rods or stud screws or for large spans

The Heavy duty pipe clamp FRSM - metric is a pipe clamp with two bolts made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the combination connecting thread, flexibility is increased. Pipelines with an outer diameter of 19 - 508 mm can therefore be safely fixed indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimal adjustment to the pipe diameterScrew loss protection.Nut with M16 thread.Sound-insulating material. Advantages The tests under high load guarantee the reliability of the FRSM.The connecting nut with combination M10/M12, M12/M16 or M16 thread allows optimal stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fixing cast iron roof drainage pipes.The system with two screws allows optimal adjustment to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of medium-heavy to heavy pipelines with threaded rods or stud screws or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a pipe clamp with two bolts made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the combination connecting thread, flexibility is increased. Pipelines with an outer diameter of 19 - 508 mm can therefore be safely fixed indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimal adjustment to the pipe diameterScrew loss protection.Nut with M16 thread.Sound-insulating material. Advantages The tests under high load guarantee the reliability of the FRSM.The connecting nut with combination M10/M12, M12/M16 or M16 thread allows optimal stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fixing cast iron roof drainage pipes.The system with two screws allows optimal adjustment to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of medium-heavy to heavy pipelines with threaded rods or stud screws or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material quality DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipes with an outside diameter of 19 - 508 mm can be fixed safely indoors with threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features Two-screw design for optimised adaptation to the outside dimensions of pipes.Prevents loss of the screw.Sound insulation insert.Application-specific corrosion protection through the stainless steel design.For indoor and outdoor use. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, for example for fixing cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of medium to heavy pipes with threaded rods or stud screws, or for large spans

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material quality DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipes with an outside diameter of 19 - 508 mm can be fixed safely indoors with threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features Two-screw design for optimised adaptation to the outside dimensions of pipes.Prevents loss of the screw.Sound insulation insert.Application-specific corrosion protection through the stainless steel design.For indoor and outdoor use. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, for example for fixing cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of medium to heavy pipes with threaded rods or stud screws, or for large spans

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads

The fischer Heavy Duty pipe clamp FRSM (metric) is a two-screw pipe clamp made of zinc-plated or hot-dip galvanised steel in material grade DD11, with a combined connection thread M8/M10 or M12/M16. The two-screw design allows optimal adjustment to the outer diameter of the pipe. Combined with the combined connection thread, this increases flexibility. Pipework with an outer diameter of 19 to 508 mm can thus be fixed safely indoors with a threaded rod or stud screw. With a chlorine- and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The fischer FRSM (metric) is suitable for applications in a temperature range of -50 °C to +110 °C. Features Two screws ensure ideal adjustment to the outer diameter of the pipe.Screw captive protection.Connecting nut with combined thread.Sound-insulating insert. Advantages High tested loads guarantee safe functioning of the FRSM.The combined connection nut with thread M10/M12, M12/M16 or M16 allows optimal installation choices.From ø 124 mm, installation with 2 threaded rods is possible, for example for fastening cast iron roof drainage pipes.With the two screws, you can easily adjust the clamp to the outer diameter of the pipe.The safety features of the screw ensure trouble-free installation.The surface coating provides high corrosion protection.Not suitable for use in chloride-containing environments. Applications Fastening of medium to heavy pipes with threaded rods (stud bolts)For indoor and outdoor applications and in environments where components are subject to high corrosion loads