Bolt anchor FAZ II Plus

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads and a wide range of applications. The steel anchor can fix heavy loads in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete. It allows a high load capacity that can be loaded immediately, even in dynamic applications. This makes the steel anchor very suitable for anchoring railings, heavy cable trays and brackets, and also for dynamic loads such as lifting platforms, conveyor belts and pumps. Features Fast and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first M6 segment anchor with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads, for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because borehole cleaning is no longer needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load-bearing capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and easy installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and it can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads, for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because borehole cleaning is no longer needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load-bearing capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and easy installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and it can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads, for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because borehole cleaning is no longer needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load-bearing capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and easy installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and it can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads, for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because borehole cleaning is no longer needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load-bearing capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and easy installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and it can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads and a wide range of applications. The steel anchor can fix heavy loads in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete. It allows a high load capacity that can be loaded immediately, even in dynamic applications. This makes the steel anchor very suitable for anchoring railings, heavy cable trays and brackets, and also for dynamic loads such as lifting platforms, conveyor belts and pumps. Features Fast and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first M6 segment anchor with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures