All products

FISCHER FAZ II Plus 12/20 R (12X120) - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 10/70 R (10X155)

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide field of application. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to set because borehole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. This makes the steel anchor extremely suitable for anchoring handrails, heavy cable trays and brackets. Features Fast and simple installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fastening solution for dynamic applications (M16-24) and can also be loaded immediately.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. The use of the filling washer FFD is optional.The variable anchoring depth allows millimetre-accurate adaptation to the load.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

FISCHER FAZ II Plus 12/50 EV (12X150) - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 10/80 EV (10x165)

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

FISCHER FAZ II Plus 12/10 E (12x110)

FISCHER FAZ II Plus 12/10 EV (12X110)

FISCHER FAZ II Plus 12/140 GS EV 12X240 - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 12/10 GS EV (12X110)

The fischer bolt anchor FAZ II Plus GS with large washer is the steel anchor for the highest demands. This electro-galvanised anchor has ETA certification for very high loads in cracked concrete. The variable anchorage depths and simple installation make the bolt anchor FAZ II Plus GS very flexible to use. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. Features Pre-assembled washer for fixtures with oversized holes. This makes alignment easier and saves time during installation.Fast and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Thanks to the special washer, the FAZ II Plus GS is very suitable for steel fixtures with oversized holes and helps to reduce installation effort.The much larger outer diameter of the washers for FAZ II Plus 16 GS gives a larger bearing surface and so allows use in timber construction.Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Base plates with oversized holesFaçade structures with oversized holesTimber structuresTension anchorsAnchoring of timber beams

FISCHER FAZ II Plus 12/160 GS R (12X260) - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 12/10 GS R (12X110)

The fischer Bolt anchor FAZ II Plus GS made of stainless steel with large washer is the steel anchor for the highest demands. This stainless steel anchor is ETA certified for very high loads in cracked concrete. Thanks to the variable anchorage depths and simple installation, the stainless steel bolt anchor FAZ II Plus GS is exceptionally flexible in use. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The stainless steel version can be used for outdoor applications. The steel anchor with large washer is therefore ideal for fixing handrails, brackets and steel structures. Features Pre-assembled washer for attachments with slotted holes. This simplifies alignment and saves time during installation.Quick and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Thanks to the special washer, the FAZ II Plus GS is very well suited to steel attachments with slotted holes and helps reduce installation effort.The considerably larger outer diameter of the washers for FAZ II Plus 16 GS provides a larger bearing surface and so makes use in timber construction possible.Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load accurate to the millimetre. Applications Base plates with slotted holesFaçade structures with slotted holesTimber structuresTension anchorsAnchoring of timber beams

FISCHER FAZ II Plus 12/10 H EV (12x109)

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchoring depths and the simple installation, the bolt anchor FAZ II Plus GS can be used in a particularly flexible way. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut gives not only an attractive finish, but also accident-free installation thanks to its rounded shape. Features Fast and simple installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD.Millimetre-accurate adaptation to the loads thanks to the variable anchoring depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version gives a safe situation.Fast and simple installation without borehole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.Together with other test reports (RWS, ZTV and ETK), the ETA certification guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchoring depth allows millimetre-accurate adaptation to the load. Applications Crash barriersBrackets

FISCHER FAZ II Plus 12/10 H R (12x109)

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchorage depths and easy installation, the bolt anchor FAZ II Plus GS can be used very flexibly. The proven expansion segment transfers the loads safely into the concrete and provides maximum load-bearing capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut not only gives an attractive finish, but also ensures accident-free installation thanks to its rounded shape. Features Quick and easy installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24, with and without the filling washer FFD.Adjustment to the loads to the millimetre through the variable anchorage depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides a safe situation.Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Crash barriersBrackets

FISCHER FAZ II Plus 8/50 HCR (8X115) - Fischer Bevestigingstechniek

FISCHER FAZ II PLUS 12/10 HCR (12X110)

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads and a wide range of applications. The steel anchor can fix heavy loads in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete. It allows a high load capacity that can be loaded immediately, even in dynamic applications. This makes the steel anchor very suitable for anchoring railings, heavy cable trays and brackets, and also for dynamic loads such as lifting platforms, conveyor belts and pumps. Features Fast and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first M6 segment anchor with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

FISCHER FAZ II Plus 10/20 K EV (10X85) - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 12/10 K EV (12X90)

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads, for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because borehole cleaning is no longer needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load-bearing capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and easy installation without borehole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and it can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

FISCHER FAZ II Plus 10/10 K GS EV 10x75 - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 12/10 K GS EV 12x90

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads for a wide field of application. The steel anchor can fix heavy loads in cracked concrete. Thanks to the shallow anchorage depth and the simple installation, the FAZ II Plus K GS can be used in a particularly flexible way. The proven expansion clip transfers the loads safely into the concrete and gives a high load capacity that can be loaded immediately. Features Pre-assembled washer for fixtures with slotted holes. This simplifies alignment and saves time during installation.Quick and simple installation without drill hole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adaptation to the loads accurate to the millimetre thanks to the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the filling washer FFD. Advantages Thanks to the special washer, the FAZ II Plus GS is very well suited to steel fixtures with slotted holes and helps to reduce installation effort.The considerably larger outer diameter of the washers for FAZ II Plus 16 GS gives a larger bearing surface and so makes use in timber construction possible.Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts for ever and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adaptation to the load accurate to the millimetre. Applications Base plates with slotted holesFacade structures with slotted holesTimber structuresTension anchorsAnchoring of timber beams

FISCHER FAZ II Plus 10/10 K R (10X75) - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 12/10 K R (12X90)

FISCHER FAZ II Plus 12/10 R (12X110)

FISCHER FAZ II Plus 12/100 EV (12X200)

FISCHER FAZ II Plus 12/100 GS EV 12X200

FISCHER FAZ II Plus 12/100 GS gvz (30x3)

FISCHER FAZ II Plus 16/160 HBS (16x278) - Fischer Bevestigingstechniek

FISCHER FAZ II Plus 12/100 HBS EV 12x205

The fischer bolt anchor FAZ II Plus HBS with washer to the timber construction standard DIN 1052 is the steel anchor for the highest demands. This electro-galvanised anchor has ETA certification for very high loads in cracked concrete. Thanks to the variable anchorage depths and the simple installation, the bolt anchor FAZ II Plus HBS can be used in a particularly flexible way. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The electro-galvanised steel version can be used to fasten timber structures, for example to fasten wall plates. Features With washer in accordance with timber construction standard DIN 1052. This gives better force transfer when fastening timber structures.Quick and simple installation without drill hole cleaning (M8-M24).Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The new ETA confirms the use of FAZ II Plus for dynamic loads for diameters M16-M24 under direct load.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24 with and without the filling washer FFD.Adaptation to the loads accurate to the millimetre thanks to the variable anchorage depths. Advantages The FAZ II Plus HBS with extra large washer meets the timber construction standard DIN 1052 and gives even better force transfer when installing, for example, wall plates.The considerably larger outer diameter of the washers for FAZ II Plus 16 GS gives a larger bearing surface and so makes use in timber construction possible.Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide field of application.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts for ever and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adaptation to the load accurate to the millimetre. Applications Base plates with slotted holesFacade structures with slotted holesTimber structuresTension anchorsAnchoring of timber beams

FISCHER FAZ II Plus 12/100 R (12X200)

FISCHER FAZ II Plus 12/120 GS EV 12X220

FISCHER FAZ II Plus 12/120 HBS EV 12x225

FISCHER FAZ II Plus 12/140 GS EV 12X240

FISCHER FAZ II Plus 12/160 EV (12X260)

FISCHER FAZ II Plus 12/160 GS EV 12x260

FISCHER FAZ II Plus 12/160 GS R (12X260)

All products

Filter products