All products

The fischer coupling pieces FAF are angle connections that are prepared for the fischer channels FUS and fischer channel nut FCN Clix P. The round holes in the brackets guarantee an exactly fitting connection with the channels. fischer offers the elements in variants with 2, 3 and 4 holes at 90° as well as variants at 135°. This makes installation extremely flexible. Features Easily make channel structures in combination with FUS channels and FCN Clix P.Corrosion protection by hot-dip galvanised surface.For indoor and outdoor use. Advantages The different shapes of the connecting elements make the installation of the channel structures even more flexible.The holes in the connecting elements guarantee a fitting installation of the FCN Clix P. Applications Installation elements for connecting or reinforcing simple channel structures

The fischer coupling pieces FAF are angle connections that are prepared for the fischer channels FUS and fischer channel nut FCN Clix P. The round holes in the brackets guarantee an exactly fitting connection with the channels. fischer offers the elements in variants with 2, 3 and 4 holes at 90° as well as variants at 135°. This makes installation extremely flexible. Features Easily make channel structures in combination with FUS channels and FCN Clix P.Corrosion protection by hot-dip galvanised surface.For indoor and outdoor use. Advantages The different shapes of the connecting elements make the installation of the channel structures even more flexible.The holes in the connecting elements guarantee a fitting installation of the FCN Clix P. Applications Installation elements for connecting or reinforcing simple channel structures

The fischer coupling pieces FAF are angle connections prepared for the fischer channels FUS and the fischer channel nut FCN Clix P. The round holes in the brackets guarantee an exactly fitting connection with the channels. fischer offers the elements in variants with 2, 3 and 4 holes at 90° as well as variants at 135°. This makes installation extremely flexible. Features Easily make channel structures in combination with FUS channels and FCN Clix P.For indoor use. Advantages The different shapes of the connecting elements make installation of the channel structures even more flexible.The holes in the connecting elements guarantee a proper fit of the FCN Clix P. Applications Installation elements for connecting or reinforcing simple channel structures

The fischer coupling pieces FAF are angle connections that are prepared for the fischer channels FUS and fischer channel nut FCN Clix P. The round holes in the brackets guarantee an exactly fitting connection with the channels. fischer offers the elements in variants with 2, 3 and 4 holes at 90° as well as variants at 135°. This makes installation extremely flexible. Features Easily make channel structures in combination with FUS channels and FCN Clix P.Corrosion protection by stainless steel.For indoor and outdoor use. Advantages The different shapes of the connecting elements make the installation of the channel structures even more flexible.The holes in the connecting elements guarantee a fitting installation of the FCN Clix P. Applications Installation elements for connecting or reinforcing simple channel structures

The FASC axial slider is used to absorb pipe expansion and is recommended for light pipes up to DN50. The FASC has a maximum sliding range of 40 mm and a maximum load capacity of 0.7 kN. fischer offers the FASC with a metric combination thread M8/M10. The FASC can be used for upright or hanging installation. The galvanised version is suitable for installation in buildings. Features Use as an upright or hanging slider.Compact axial slider for space-saving use.Compatible with the FLS and FUS channel systems. Advantages The FASC can be used flexibly, thanks to the options of use as an upright or hanging slider.The low sliding friction of the plastic sliding sole allows optimum force transfer to the fixed point.The base plate of the FASC is compatible with the channel systems FLS and FUS and allows fixing with just one screw.The flexible combination thread allows the use of pipe clamps of different sizes. Applications Heating pipesCooling pipesHot water and circulation pipesMedium pipes with thermal expansion

The FASH axial slider is used to absorb pipe expansion and is recommended for heavy pipes up to DN350. The FASM has a maximum sliding range of 140 mm and a maximum load capacity of 10.0 kN. fischer offers the FASH with a metric combination thread M12/M16. The FASL can be used for standing or hanging installation. The galvanised version is suitable for installations in buildings. The Axial Slider FASH2 gives an extra margin of safety thanks to its fire safety certificate. Features Fire test report according to MLAR R30 up to a maximum of R120.Use as an upright or hanging slider.Sliding path of 140 mm possible.Compatible with the FUS and FMS channel systems. Advantages The fire test report according to MLAR R30 up to a maximum of R120 guarantees objectively tested functional safety.The FASH can be used flexibly, thanks to its use as a standing or hanging slider and as a guide bearing on vertical pipes.The low sliding friction of the two sliding rollers allows optimum transfer of force to the fixed point. Thanks to the large sliding path and the two sliding rollers, large expansions can be absorbed without problems.The base plate of the FASH is compatible with the FUS and FMS channel systems and can be fixed with one or two screws.A cross-slider function for the FASH1 or FASH2 is possible with the cross slider FCSM and with the FASH2. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesMedia lines with thermal expansion

The FASH axial slider is used to absorb pipe expansion and is recommended for heavy pipes up to DN350. The FASM has a maximum sliding range of 140 mm and a maximum load capacity of 10.0 kN. fischer offers the FASH with a metric combination thread M12/M16. The FASL can be used for standing or hanging installation. The galvanised version is suitable for installations in buildings. The Axial Slider FASH2 gives an extra margin of safety thanks to its fire safety certificate. Features Fire test report according to MLAR R30 up to a maximum of R120.Use as an upright or hanging slider.Sliding path of 140 mm possible.Compatible with the FUS and FMS channel systems. Advantages The fire test report according to MLAR R30 up to a maximum of R120 guarantees objectively tested functional safety.The FASH can be used flexibly, thanks to its use as a standing or hanging slider and as a guide bearing on vertical pipes.The low sliding friction of the two sliding rollers allows optimum transfer of force to the fixed point. Thanks to the large sliding path and the two sliding rollers, large expansions can be absorbed without problems.The base plate of the FASH is compatible with the FUS and FMS channel systems and can be fixed with one or two screws.A cross-slider function for the FASH1 or FASH2 is possible with the cross slider FCSM and with the FASH2. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesMedia lines with thermal expansion

The FASL axial slider is used to absorb pipe expansion and is recommended for light pipes up to DN100. The FASL has a maximum sliding range of 100 mm / 120 mm and a maximum load capacity of 1.5 kN. fischer offers the FASL with a metric combination thread M8/M10 and with a single thread M10. The FASL can be used for standing or hanging installation. The galvanised version is suitable for installations in buildings. Features Use as an upright or hanging slider.Sliding path of 100 or 120 mm possible.Compatible with the FLS and FUS channel systems. Advantages The FASL can be used flexibly, thanks to its use as a standing or hanging slider and as a guide bearing on vertical pipes.The low sliding friction of the plastic sliding rails allows optimum transfer of force to the fixed point. Thanks to the large sliding path and the long sliding rails, large expansions can be absorbed without problems.The base plate of the FASL is compatible with the FLS and FUS channel systems and can be fixed with one or two screws.The flexible combination thread allows pipe clamps of different sizes to be used. Applications Heating pipesRefrigeration pipesHot water and circulation pipesMedia lines with thermal expansion

The FASL axial slider is used to absorb pipe expansion and is recommended for light pipes up to DN100. The FASL has a maximum sliding range of 100 mm / 120 mm and a maximum load capacity of 1.5 kN. fischer offers the FASL with a metric combination thread M8/M10 and with a single thread M10. The FASL can be used for upright or hanging installation. The galvanised version is suitable for installations in buildings. Features Use as an upright or hanging slider.Sliding path of 100 or 120 mm possible.Compatible with the FLS and FUS channel systems. Advantages The FASL can be used flexibly, thanks to the options of use as an upright or hanging slider and as a guide bearing on vertical pipes.The low sliding friction of the plastic sliding rails allows optimum force transfer to the fixed point. Thanks to the large sliding path and the long sliding rails, large expansions can be absorbed without problems.The base plate of the FASL is compatible with the channel systems FLS and FUS and can be fixed with one or two screws.The flexible combination thread allows the use of pipe clamps of different sizes. Applications Heating pipesCooling pipesHot water and circulation pipesMedium pipes with thermal expansion

The axial slider FASM is used to absorb pipe expansion and is recommended for medium-heavy pipes up to DN150. The FASM has a maximum sliding distance of 100 mm / 150 mm and a maximum load capacity of 3.0 kN. fischer supplies the FASM with metric combination thread M10/M12. The FASM is suitable for both standing and hanging installation. The hot-dip galvanised version is suitable for installations in buildings. The axial slider FASM offers extra safety thanks to the fire certificate supplied. Advantages The first test report according to MLAR R30 up to a maximum of R120 ensures objectively tested functional safety.The FASM can be used flexibly, for example as a standing or hanging sliding element and as a guide on vertical pipes.The low frictional resistance of the plastic sliding rails ensures optimal force transfer at the fixed point.The long sliding distance and the long sliding rails make it possible to absorb large expansions without problems.The base plate of the FASM is compatible with the FUS and FMS channel system and allows fixing with one or two bolts.A cross-sliding function of the FASM is possible in combination with the FCSM cross slider or with the FASL2 M10. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesPipes with thermal expansionFor use in dry indoor areas

The axial slider FASM is used to absorb pipe expansion and is recommended for medium-heavy pipes up to DN150. The FASM has a maximum sliding distance of 100 mm / 150 mm and a maximum load capacity of 3.0 kN. fischer supplies the FASM with metric combination thread M10/M12. The FASM is suitable for both standing and hanging installation. The hot-dip galvanised version is suitable for installations in buildings. The axial slider FASM offers extra safety thanks to the fire certificate supplied. Advantages The first test report according to MLAR R30 up to a maximum of R120 ensures objectively tested functional safety.The FASM can be used flexibly, for example as a standing or hanging sliding element and as a guide on vertical pipes.The low frictional resistance of the plastic sliding rails ensures optimal force transfer at the fixed point.The long sliding distance and the long sliding rails make it possible to absorb large expansions without problems.The base plate of the FASM is compatible with the FUS and FMS channel system and allows fixing with one or two bolts.A cross-sliding function of the FASM is possible in combination with the FCSM cross slider or with the FASL2 M10. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesPipes with thermal expansionFor use in dry indoor areas

The FASM axial slider is used to absorb pipe expansion and is recommended for medium-sized pipes up to DN150. The FASM has a maximum sliding range of 100 mm / 150 mm and a maximum load-bearing capacity of 3.0 kN. fischer offers the FASM with a metric combination thread M10/M12. The FASL can be used for upright or suspended installation. The galvanised version is suitable for installation in buildings. The axial slider FASM2 guarantees an extra measure of safety thanks to the fire safety certificate. Features Fire test report according to MLAR R30 up to a maximum of R120.Use as an upright or suspended slider.Sliding distance of 100 or 150 mm possible.Compatible with the FUS and FMS channel systems. Advantages The fire test report according to MLAR R30 up to a maximum of R120 guarantees objectively tested functional safety.The FASM can be used flexibly, thanks to the options of use as an upright or suspended slider and as a guide bearing on vertical pipes.The low sliding friction of the plastic sliding rails allows optimal force transmission to the fixed point. Thanks to the large sliding distance and the long sliding rails, large expansions can be absorbed without problems.The base plate of the FASM is compatible with the FUS and FMS channel systems and can be fixed with one or two screws.A cross slider function of the FASM is possible with the cross slider FCSM and with the FASL2 M10. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesMedium pipes with thermal expansion

The axial slider FASM is used to absorb pipe expansion and is recommended for medium-heavy pipes up to DN150. The FASM has a maximum sliding distance of 100 mm / 150 mm and a maximum load capacity of 3.0 kN. fischer supplies the FASM with metric combination thread M10/M12. The FASM is suitable for both standing and hanging installation. The hot-dip galvanised version is suitable for installations in buildings. The axial slider FASM offers extra safety thanks to the fire certificate supplied. Advantages The first test report according to MLAR R30 up to a maximum of R120 ensures objectively tested functional safety.The FASM can be used flexibly, for example as a standing or hanging sliding element and as a guide on vertical pipes.The low frictional resistance of the plastic sliding rails ensures optimal force transfer at the fixed point.The long sliding distance and the long sliding rails make it possible to absorb large expansions without problems.The base plate of the FASM is compatible with the FUS and FMS channel system and allows fixing with one or two bolts.A cross-sliding function of the FASM is possible in combination with the FCSM cross slider or with the FASL2 M10. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesPipes with thermal expansionFor use in dry indoor areas

The axial slider FASM is used to absorb pipe expansion and is recommended for medium-heavy pipes up to DN150. The FASM has a maximum sliding distance of 100 mm / 150 mm and a maximum load capacity of 3.0 kN. fischer supplies the FASM with metric combination thread M10/M12. The FASM is suitable for both standing and hanging installation. The hot-dip galvanised version is suitable for installations in buildings. The axial slider FASM offers extra safety thanks to the fire certificate supplied. Advantages The first test report according to MLAR R30 up to a maximum of R120 ensures objectively tested functional safety.The FASM can be used flexibly, for example as a standing or hanging sliding element and as a guide on vertical pipes.The low frictional resistance of the plastic sliding rails ensures optimal force transfer at the fixed point.The long sliding distance and the long sliding rails make it possible to absorb large expansions without problems.The base plate of the FASM is compatible with the FUS and FMS channel system and allows fixing with one or two bolts.A cross-sliding function of the FASM is possible in combination with the FCSM cross slider or with the FASL2 M10. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesPipes with thermal expansionFor use in dry indoor areas

The FASM axial slider is used to absorb pipe expansion and is recommended for medium-sized pipes up to DN150. The FASM has a maximum sliding range of 100 mm / 150 mm and a maximum load-bearing capacity of 3.0 kN. fischer offers the FASM with a metric combination thread M10/M12. The FASL can be used for upright or suspended installation. The galvanised version is suitable for installation in buildings. The axial slider FASM2 guarantees an extra measure of safety thanks to the fire safety certificate. Features Fire test report according to MLAR R30 up to a maximum of R120.Use as an upright or suspended slider.Sliding distance of 100 or 150 mm possible.Compatible with the FUS and FMS channel systems. Advantages The fire test report according to MLAR R30 up to a maximum of R120 guarantees objectively tested functional safety.The FASM can be used flexibly, thanks to the options of use as an upright or suspended slider and as a guide bearing on vertical pipes.The low sliding friction of the plastic sliding rails allows optimal force transmission to the fixed point. Thanks to the large sliding distance and the long sliding rails, large expansions can be absorbed without problems.The base plate of the FASM is compatible with the FUS and FMS channel systems and can be fixed with one or two screws.A cross slider function of the FASM is possible with the cross slider FCSM and with the FASL2 M10. Applications Heating pipesRefrigeration pipesSteam pipesHot water and circulation pipesMedium pipes with thermal expansion

The fischer adjusting wheel FAW is a connecting element used for height adjustment and stabilisation of suspended FUS channels with threaded ends, without the use of tools. The shape of the adjusting wheel guides and stabilises the channels and allows central alignment because it engages in the open side of the channel. Thanks to its fire-tested design, the adjusting wheel FAW can also be used in installations in escape and rescue routes. The zinc-plated version is suitable for applications in buildings. Features Allows height adjustment of FUS channels without tools.Fire-tested and centrally guided fixing on threaded ends.Thanks to the fire test, also suitable for installations in escape and rescue routes. Advantages The fire test according to MLAR/EN1366 guarantees objectively tested functional safety.Height adjustment and fixing of the FUS channel with the adjusting wheel FAW is possible without tools (hand-tight).Guiding and stabilisation of the channel, as well as central alignment, are achieved because the adjusting wheel FAW engages in the open side of the channel.Quick installation of suspended FUS channels on threaded ends is made possible by the complete adjusting wheel FAW, which replaces the combination of clamp, slider and nut.Subsequent adjustment under load with the adjusting wheel FAW can be made easier by using a hook spanner (DIN 1810-A40-42). Applications Fixing and height adjustment of suspended FUS channels with threaded ends.Recommended to be used in pairs for fixing.For use in dry indoor spaces.

The fischer adjusting wheel FAW is a connecting element used for height adjustment and stabilisation of suspended FUS channels with threaded ends, without the use of tools. The shape of the adjusting wheel guides and stabilises the channels and allows central alignment because it engages in the open side of the channel. Thanks to its fire-tested design, the adjusting wheel FAW can also be used in installations in escape and rescue routes. The zinc-plated version is suitable for applications in buildings. Features Allows height adjustment of FUS channels without tools.Fire-tested and centrally guided fixing on threaded ends.Thanks to the fire test, also suitable for installations in escape and rescue routes. Advantages The fire test according to MLAR/EN1366 guarantees objectively tested functional safety.Height adjustment and fixing of the FUS channel with the adjusting wheel FAW is possible without tools (hand-tight).Guiding and stabilisation of the channel, as well as central alignment, are achieved because the adjusting wheel FAW engages in the open side of the channel.Quick installation of suspended FUS channels on threaded ends is made possible by the complete adjusting wheel FAW, which replaces the combination of clamp, slider and nut.Subsequent adjustment under load with the adjusting wheel FAW can be made easier by using a hook spanner (DIN 1810-A40-42). Applications Fixing and height adjustment of suspended FUS channels with threaded ends.Recommended to be used in pairs for fixing.For use in dry indoor spaces.

The fischer adjusting wheel FAW is a connecting element used for height adjustment and stabilisation of suspended FUS channels with threaded ends, without the use of tools. The shape of the adjusting wheel guides and stabilises the channels and allows central alignment because it engages in the open side of the channel. Thanks to its fire-tested design, the adjusting wheel FAW can also be used in installations in escape and rescue routes. The zinc-plated version is suitable for applications in buildings. Features Allows height adjustment of FUS channels without tools.Fire-tested and centrally guided fixing on threaded ends.Thanks to the fire test, also suitable for installations in escape and rescue routes. Advantages The fire test according to MLAR/EN1366 guarantees objectively tested functional safety.Height adjustment and fixing of the FUS channel with the adjusting wheel FAW is possible without tools (hand-tight).Guiding and stabilisation of the channel, as well as central alignment, are achieved because the adjusting wheel FAW engages in the open side of the channel.Quick installation of suspended FUS channels on threaded ends is made possible by the complete adjusting wheel FAW, which replaces the combination of clamp, slider and nut.Subsequent adjustment under load with the adjusting wheel FAW can be made easier by using a hook spanner (DIN 1810-A40-42). Applications Fixing and height adjustment of suspended FUS channels with threaded ends.Recommended to be used in pairs for fixing.For use in dry indoor spaces.

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus GS with large washer is the steel anchor for the highest demands. This electro-galvanised anchor has ETA certification for very high loads in cracked concrete. The variable anchorage depths and simple installation make the bolt anchor FAZ II Plus GS very flexible to use. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. Features Pre-assembled washer for fixtures with oversized holes. This makes alignment easier and saves time during installation.Fast and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Thanks to the special washer, the FAZ II Plus GS is very suitable for steel fixtures with oversized holes and helps to reduce installation effort.The much larger outer diameter of the washers for FAZ II Plus 16 GS gives a larger bearing surface and so allows use in timber construction.Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Base plates with oversized holesFaçade structures with oversized holesTimber structuresTension anchorsAnchoring of timber beams

The fischer Bolt anchor FAZ II Plus GS made of stainless steel with large washer is the steel anchor for the highest demands. This stainless steel anchor is ETA certified for very high loads in cracked concrete. Thanks to the variable anchorage depths and simple installation, the stainless steel bolt anchor FAZ II Plus GS is exceptionally flexible in use. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The stainless steel version can be used for outdoor applications. The steel anchor with large washer is therefore ideal for fixing handrails, brackets and steel structures. Features Pre-assembled washer for attachments with slotted holes. This simplifies alignment and saves time during installation.Quick and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Thanks to the special washer, the FAZ II Plus GS is very well suited to steel attachments with slotted holes and helps reduce installation effort.The considerably larger outer diameter of the washers for FAZ II Plus 16 GS provides a larger bearing surface and so makes use in timber construction possible.Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load accurate to the millimetre. Applications Base plates with slotted holesFaçade structures with slotted holesTimber structuresTension anchorsAnchoring of timber beams

The fischer bolt anchor FAZ II Plus H with cap nut is the steel anchor for the highest demands and an attractive finish. The sizes M10 and M12 are included in the ETA certification. Thanks to the variable anchorage depths and easy installation, the bolt anchor FAZ II Plus GS can be used very flexibly. The proven expansion segment transfers the loads safely into the concrete and provides maximum load-bearing capacity. The FAZ II Plus H is the ideal solution, for example, for anchoring handrails and in visible areas: the cap nut not only gives an attractive finish, but also ensures accident-free installation thanks to its rounded shape. Features Quick and easy installation without borehole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Greatly increased tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.The highest durability with a service life of 120 years, confirmed by an 'expert report' on the FAZ II Plus (M10-M16).Highest seismic loads for diameters M10-M24, with and without the filling washer FFD.Adjustment to the loads to the millimetre through the variable anchorage depths.The cap nut version is included in the ETA certification and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides an accident-free situation. Advantages The cap nut is included in the ETA and is very suitable for architectural applications.Thanks to its rounded shape, the cap nut version provides a safe situation.Quick and easy installation without borehole cleaning (M8-M24).Numerous certifications for various substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. As a result, fewer fixing points and therefore fewer anchors are needed.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus lasts an eternity and is therefore perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Crash barriersBrackets

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands, with high tensile loads and a wide range of applications. The steel anchor can fix heavy loads in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete. It allows a high load capacity that can be loaded immediately, even in dynamic applications. This makes the steel anchor very suitable for anchoring railings, heavy cable trays and brackets, and also for dynamic loads such as lifting platforms, conveyor belts and pumps. Features Fast and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The fast installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load to the millimetre.The first M6 segment anchor with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures