All products

With the fischer impact nail ED, the fischer conduit clips and fischer perforated band are driven in without pre-drilling. For installation, the fischer impact nail is placed in the setting tool SZE. The holder keeps the nail in place during setting. With just a few taps of the hammer, the impact nail sits firmly in the concrete. Features Fast and easy impact installation without pre-drilling in concrete.Safe driving in thanks to impact protection by the setting tool SZE. Advantages The stable impact nail ED can be set in concrete without pre-drilling, using the setting tool SZE. This allows fast installation.The impact protection of the setting tool SZE gives optimum protection for your hand and so safe installation. Applications For fixing:Conduit clips such as BSM, BSMD, BSMZPerforated band, such as LBK, LBV

The fischer KDS spring toggle with VdS and FM certification is a fastening element for trapezoidal roof sheets. It offers a safe and objectively tested solution for fixing fixed sprinkler systems. Other components, such as channels, ventilation ducts, high-voltage cables and lighting systems, can also be fixed to trapezoidal sheet simply and quickly. The height-adjustable threaded rod, which is secured against accidental loosening, allows practical alignment of the attached part. The different lengths always offer a solution for every application. Features The KDS 8 has VdS certification and so guarantees objectively tested functional reliability for use in sprinkler systems. Advantages The whole KDS range has VdS certification. The KDS 10 also has FM certification. This means the KDS spring toggle guarantees objectively tested functional reliability for use in sprinkler systems.Available in lengths from 100 to 500 mm (KDS 8) and 100 to 200 mm (KDS 10).The rotating threaded rod makes it easy to adjust the height within the trapezoidal sheet. The threaded rod is secured against accidental loosening.Complete with threaded rod, nut, washer, sealing ring and distribution block. The sealing ring ensures a reliable seal on the trapezoidal sheet. Applications The fully pre-assembled toggle plug KDS is used as a fastening element on trapezoidal metal ceilings.Suitable, for example, for fixing pipes, channels, ventilation ducts, electrical cables and lighting systems. Fixing of sprinkler pipes on trapezoidal metal sheets: from ¾ to 1 ½“ inch according to FM, max. DN 50 (2”) according to VdS.The permissible tensile load per fixing point for sprinkler pipes on trapezoidal sheets is 0.8 kN, for other fixings it is 1.0 kN.For use in dry indoor areas.

The fischer KDS spring toggle with VdS and FM certification is a fastening element for trapezoidal roof sheets. It offers a safe and objectively tested solution for fixing fixed sprinkler systems. Other components, such as channels, ventilation ducts, high-voltage cables and lighting systems, can also be fixed to trapezoidal sheet simply and quickly. The height-adjustable threaded rod, which is secured against accidental loosening, allows practical alignment of the attached part. The different lengths always offer a solution for every application. Features The KDS 8 has VdS certification and so guarantees objectively tested functional reliability for use in sprinkler systems. Advantages The whole KDS range has VdS certification. The KDS 10 also has FM certification. This means the KDS spring toggle guarantees objectively tested functional reliability for use in sprinkler systems.Available in lengths from 100 to 500 mm (KDS 8) and 100 to 200 mm (KDS 10).The rotating threaded rod makes it easy to adjust the height within the trapezoidal sheet. The threaded rod is secured against accidental loosening.Complete with threaded rod, nut, washer, sealing ring and distribution block. The sealing ring ensures a reliable seal on the trapezoidal sheet. Applications The fully pre-assembled toggle plug KDS is used as a fastening element on trapezoidal metal ceilings.Suitable, for example, for fixing pipes, channels, ventilation ducts, electrical cables and lighting systems. Fixing of sprinkler pipes on trapezoidal metal sheets: from ¾ to 1 ½“ inch according to FM, max. DN 50 (2”) according to VdS.The permissible tensile load per fixing point for sprinkler pipes on trapezoidal sheets is 0.8 kN, for other fixings it is 1.0 kN.For use in dry indoor areas.

The fischer KDS spring toggle with VdS and FM certification is a fastening element for trapezoidal roof sheets. It offers a safe and objectively tested solution for fixing fixed sprinkler systems. Other components, such as channels, ventilation ducts, high-voltage cables and lighting systems, can also be fixed to trapezoidal sheet simply and quickly. The height-adjustable threaded rod, which is secured against accidental loosening, allows practical alignment of the attached part. The different lengths always offer a solution for every application. Features The KDS 8 has VdS certification and so guarantees objectively tested functional reliability for use in sprinkler systems. Advantages The whole KDS range has VdS certification. The KDS 10 also has FM certification. This means the KDS spring toggle guarantees objectively tested functional reliability for use in sprinkler systems.Available in lengths from 100 to 500 mm (KDS 8) and 100 to 200 mm (KDS 10).The rotating threaded rod makes it easy to adjust the height within the trapezoidal sheet. The threaded rod is secured against accidental loosening.Complete with threaded rod, nut, washer, sealing ring and distribution block. The sealing ring ensures a reliable seal on the trapezoidal sheet. Applications The fully pre-assembled toggle plug KDS is used as a fastening element on trapezoidal metal ceilings.Suitable, for example, for fixing pipes, channels, ventilation ducts, electrical cables and lighting systems. Fixing of sprinkler pipes on trapezoidal metal sheets: from ¾ to 1 ½“ inch according to FM, max. DN 50 (2”) according to VdS.The permissible tensile load per fixing point for sprinkler pipes on trapezoidal sheets is 0.8 kN, for other fixings it is 1.0 kN.For use in dry indoor areas.

The fischer KDS spring toggle with VdS and FM certification is a fastening element for trapezoidal roof sheets. It offers a safe and objectively tested solution for fixing fixed sprinkler systems. Other components, such as channels, ventilation ducts, high-voltage cables and lighting systems, can also be fixed to trapezoidal sheet simply and quickly. The height-adjustable threaded rod, which is secured against accidental loosening, allows practical alignment of the attached part. The different lengths always offer a solution for every application. Features The KDS 8 has VdS certification and so guarantees objectively tested functional reliability for use in sprinkler systems. Advantages The whole KDS range has VdS certification. The KDS 10 also has FM certification. This means the KDS spring toggle guarantees objectively tested functional reliability for use in sprinkler systems.Available in lengths from 100 to 500 mm (KDS 8) and 100 to 200 mm (KDS 10).The rotating threaded rod makes it easy to adjust the height within the trapezoidal sheet. The threaded rod is secured against accidental loosening.Complete with threaded rod, nut, washer, sealing ring and distribution block. The sealing ring ensures a reliable seal on the trapezoidal sheet. Applications The fully pre-assembled toggle plug KDS is used as a fastening element on trapezoidal metal ceilings.Suitable, for example, for fixing pipes, channels, ventilation ducts, electrical cables and lighting systems. Fixing of sprinkler pipes on trapezoidal metal sheets: from ¾ to 1 ½“ inch according to FM, max. DN 50 (2”) according to VdS.The permissible tensile load per fixing point for sprinkler pipes on trapezoidal sheets is 0.8 kN, for other fixings it is 1.0 kN.For use in dry indoor areas.

The fischer KDS spring toggle with VdS and FM certification is a fastening element for trapezoidal roof sheets. It offers a safe and objectively tested solution for fixing fixed sprinkler systems. Other components, such as channels, ventilation ducts, high-voltage cables and lighting systems, can also be fixed to trapezoidal sheet simply and quickly. The height-adjustable threaded rod, which is secured against accidental loosening, allows practical alignment of the attached part. The different lengths always offer a solution for every application. Features The KDS 8 has VdS certification and so guarantees objectively tested functional reliability for use in sprinkler systems. Advantages The whole KDS range has VdS certification. The KDS 10 also has FM certification. This means the KDS spring toggle guarantees objectively tested functional reliability for use in sprinkler systems.Available in lengths from 100 to 500 mm (KDS 8) and 100 to 200 mm (KDS 10).The rotating threaded rod makes it easy to adjust the height within the trapezoidal sheet. The threaded rod is secured against accidental loosening.Complete with threaded rod, nut, washer, sealing ring and distribution block. The sealing ring ensures a reliable seal on the trapezoidal sheet. Applications The fully pre-assembled toggle plug KDS is used as a fastening element on trapezoidal metal ceilings.Suitable, for example, for fixing pipes, channels, ventilation ducts, electrical cables and lighting systems. Fixing of sprinkler pipes on trapezoidal metal sheets: from ¾ to 1 ½“ inch according to FM, max. DN 50 (2”) according to VdS.The permissible tensile load per fixing point for sprinkler pipes on trapezoidal sheets is 0.8 kN, for other fixings it is 1.0 kN.For use in dry indoor areas.

The fischer KDS spring toggle with VdS and FM certification is a fastening element for trapezoidal roof sheets. It offers a safe and objectively tested solution for fixing fixed sprinkler systems. Other components, such as channels, ventilation ducts, high-voltage cables and lighting systems, can also be fixed to trapezoidal sheet simply and quickly. The height-adjustable threaded rod, which is secured against accidental loosening, allows practical alignment of the attached part. The different lengths always offer a solution for every application. Features The KDS 8 has VdS certification and so guarantees objectively tested functional reliability for use in sprinkler systems. Advantages The whole KDS range has VdS certification. The KDS 10 also has FM certification. This means the KDS spring toggle guarantees objectively tested functional reliability for use in sprinkler systems.Available in lengths from 100 to 500 mm (KDS 8) and 100 to 200 mm (KDS 10).The rotating threaded rod makes it easy to adjust the height within the trapezoidal sheet. The threaded rod is secured against accidental loosening.Complete with threaded rod, nut, washer, sealing ring and distribution block. The sealing ring ensures a reliable seal on the trapezoidal sheet. Applications The fully pre-assembled toggle plug KDS is used as a fastening element on trapezoidal metal ceilings.Suitable, for example, for fixing pipes, channels, ventilation ducts, electrical cables and lighting systems. Fixing of sprinkler pipes on trapezoidal metal sheets: from ¾ to 1 ½“ inch according to FM, max. DN 50 (2”) according to VdS.The permissible tensile load per fixing point for sprinkler pipes on trapezoidal sheets is 0.8 kN, for other fixings it is 1.0 kN.For use in dry indoor areas.

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads