Installation technology

The Heavy duty pipe clamp FRSM - metric is a pipe clamp with two bolts made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the combination connecting thread, flexibility is increased. Pipelines with an outer diameter of 19 - 508 mm can therefore be safely fixed indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimal adjustment to the pipe diameterScrew loss protection.Nut with M16 thread.Sound-insulating material. Advantages The tests under high load guarantee the reliability of the FRSM.The connecting nut with combination M10/M12, M12/M16 or M16 thread allows optimal stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fixing cast iron roof drainage pipes.The system with two screws allows optimal adjustment to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of medium-heavy to heavy pipelines with threaded rods or stud screws or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The Heavy duty pipe clamp FRSM - metric is a two-bolt pipe clamp made of electro-galvanised steel in material grade DD11 with combination thread M 8/M 10 or M 12/M 16. The two-screw design allows optimum adaptation to the pipe diameter. In combination with the combined connection thread, flexibility is increased. In this way, pipelines with an outer diameter of 19 - 508 mm can be fastened safely indoors with a threaded rod or stud screw. With a chlorine-free and silicone-free sound-damping layer, the pipe clamp meets the requirements of DIN 4109. The FRSM - metric is suitable for applications in a temperature range from -50°C to +110°C. Features With two screws for optimum adaptation to the pipe diameterCaptive screw.Nut with combination thread.Sound-insulating material. Advantages Tests under high load guarantee the reliability of the FRSM.The connection nut with combined M10/M12, M12/M16 or M16 thread allows optimum stock management.From ø 124 mm, installation with 2 threaded rods is possible, e.g. for fastening cast iron drain pipes to roofs.The two-screw system allows optimum adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of medium to heavy pipelines with threaded rods or stud screws, or for large spans

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings

The fischer pipe clamp FRSN is a two-screw pipe clamp made of zinc plated steel in material quality DD11 with combined connection thread M8/M10 without sound-damping insert. The two-screw design allows optimum adaptation to the outside diameter of the pipe. Together with the combined connection thread, this increases flexibility. As a result, plastic and metal pipes with an outside diameter of 15 to 219 mm can be fixed safely and economically in buildings with a threaded rod or set screw. Features With two screws for optimum adaptation to the pipe diameterLoss protection of the screw.Nut with combination thread. Advantages The FRSN without sound-damping inlay is ideal for use in industrial applications and for plastic pipes.The connection nut with combined M8/M10 thread gives flexibility on site.Thanks to the two-screw system, the clamp can be adapted optimally to the outside diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fixing of metal or plastic pipes without sound damping, with threaded rods or stud screws, e.g. in industrial buildings