Installation technology

The beam clamp TKL is suitable for fixing pipes, especially sprinkler pipes, to steel beams without the need for welding and drilling. The beam clamp is fixed in place with a screw. The integrated thread allows direct installation on a threaded rod. VdS, FM and UL certificates guarantee safe installation. The TKL, made of high-quality steel, is galvanised for protection against corrosion. Features TKL M8 VdS certified.TKL M10 VdS/FM/UL certificates.TKL M12 VdS/FM/UL certificates. Advantages The design of the TKL with fixing screw allows fixing to steel beams without welding and drilling.The design of the fixing screw effectively prevents the clamp from sliding off the steel beam.VdS/FMcertificates guarantee independently checked safety.The massive design of the TKL guarantees a high load capacity.The TKL with thread holder guarantees simple and fast installation.The TKL with through opening allows height adjustment afterwards at any time. Applications Simple fixing by clamping onto steel beamsFor VdS installations, safety plates SS-TKL are required from ø 65 mm

The beam clamp TKL is suitable for fixing pipes, especially sprinkler pipes, to steel beams without the need for welding and drilling. The beam clamp is fixed in place with a screw. The integrated thread allows direct installation on a threaded rod. VdS, FM and UL certificates guarantee safe installation. The TKL, made of high-quality steel, is galvanised for protection against corrosion. Features Hot-dip galvanised. Advantages The design of the TKL with fixing screw allows fixing to steel beams without welding and drilling.The design of the fixing screw effectively prevents the clamp from sliding off the steel beam.VdS/FMcertificates guarantee independently checked safety.The massive design of the TKL guarantees a high load capacity.The TKL with thread holder guarantees simple and fast installation.The TKL with through opening allows height adjustment afterwards at any time. Applications Simple fixing by clamping onto steel beamsFor VdS installations, safety plates SS-TKL are required from ø 65 mm

The beam clamp TKL is suitable for fixing pipes, especially sprinkler pipes, to steel beams without the need for welding and drilling. The beam clamp is fixed in place with a screw. The integrated thread allows direct installation on a threaded rod. VdS, FM and UL certificates guarantee safe installation. The TKL, made of high-quality steel, is galvanised for protection against corrosion. Features Hot-dip galvanised. Advantages The design of the TKL with fixing screw allows fixing to steel beams without welding and drilling.The design of the fixing screw effectively prevents the clamp from sliding off the steel beam.VdS/FMcertificates guarantee independently checked safety.The massive design of the TKL guarantees a high load capacity.The TKL with thread holder guarantees simple and fast installation.The TKL with through opening allows height adjustment afterwards at any time. Applications Simple fixing by clamping onto steel beamsFor VdS installations, safety plates SS-TKL are required from ø 65 mm

The beam clamp TKL is suitable for fixing pipelines, especially sprinkler pipes, to steel beams without welding and drilling. The beam clamp is fixed with a screw. The integrated thread allows direct installation on a threaded rod. VdS, FM and UL certificates guarantee safe installation. The TKL, made of high-quality steel, is galvanised for protection against corrosion. Features Stainless steel A4. Advantages The design of the TKL with fixing screw allows fixing to steel beams without welding and drilling.The design of the fixing screw effectively prevents the clamp from sliding off the steel beam.VdS/FMcertificates guarantee independently verified safety.The massive version of the TKL guarantees a high load capacity.The TKL with thread holder guarantees simple and quick installation.The TKL with feed-through opening allows height adjustment afterwards at any time. Applications Simple fixing by clamping onto steel beamsFor VdS installations, safety plates SS-TKL are required from ø 65 mm

The beam clamp TKL is suitable for fixing pipelines, especially sprinkler pipes, to steel beams without welding and drilling. The beam clamp is fixed with a screw. The integrated thread allows direct installation on a threaded rod. VdS, FM and UL certificates guarantee safe installation. The TKL, made of high-quality steel, is galvanised for protection against corrosion. Features Stainless steel A4. Advantages The design of the TKL with fixing screw allows fixing to steel beams without welding and drilling.The design of the fixing screw effectively prevents the clamp from sliding off the steel beam.VdS/FMcertificates guarantee independently verified safety.The massive version of the TKL guarantees a high load capacity.The TKL with thread holder guarantees simple and quick installation.The TKL with feed-through opening allows height adjustment afterwards at any time. Applications Simple fixing by clamping onto steel beamsFor VdS installations, safety plates SS-TKL are required from ø 65 mm

The beam clamp TKL is suitable for fixing pipelines, especially sprinkler pipes, to steel beams without welding and drilling. The beam clamp is fixed with a screw. The integrated thread allows direct installation on a threaded rod. VdS, FM and UL certificates guarantee safe installation. The TKL, made of high-quality steel, is galvanised for protection against corrosion. Features Stainless steel A4. Advantages The design of the TKL with fixing screw allows fixing to steel beams without welding and drilling.The design of the fixing screw effectively prevents the clamp from sliding off the steel beam.VdS/FMcertificates guarantee independently verified safety.The massive version of the TKL guarantees a high load capacity.The TKL with thread holder guarantees simple and quick installation.The TKL with feed-through opening allows height adjustment afterwards at any time. Applications Simple fixing by clamping onto steel beamsFor VdS installations, safety plates SS-TKL are required from ø 65 mm

The fischer swivel beam clamp TKLG is suitable for fixing pipes, in particular sprinkler pipes, to inclined steel support structures without drilling or welding. The clamp is fixed to the beam with a screw and is suitable for pipes with an M8 or M10 thread. Thanks to the integrated threaded hole, threaded ends can be fitted directly. The TKLG is FM and VdS approved and can therefore be used in stationary sprinkler systems. The clamp is made of high-quality steel and electro-galvanised for protection against corrosion. Advantages Thanks to the hinge design, suitable for installation on inclined or tilted steel beams without welding or drillingThe connection can be rotated through 360° and allows installation at any angle (0–180°)FM and VdS approval guarantee tested functional reliabilitySuitable for stationary sprinkler installationsCompact and robust design with high load capacityM8 or M10 internal thread allows quick and simple installation of threaded endsSuitable for steel beams with a flange thickness of up to 17 mm Applications For easy fixing of pipes or channels to inclined or tilted steel beamsFor hanging sprinkler pipes on inclined or tilted steel beams up to an angle of max. 25°, in accordance with FM and VdSFor pipes ≥ DN 65; when installed on inclined beams, the clamp must be secured with the SS-TKLG locking band (retaining strap)For piping systems up to DN 100 according to VdSSuitable for steel beams with a flange thickness of up to 17 mmOnly for use in dry indoor areas

The fischer swivel beam clamp TKLG is suitable for fixing pipes, in particular sprinkler pipes, to inclined steel support structures without drilling or welding. The clamp is fixed to the beam with a screw and is suitable for pipes with an M8 or M10 thread. Thanks to the integrated threaded hole, threaded ends can be fitted directly. The TKLG is FM and VdS approved and can therefore be used in stationary sprinkler systems. The clamp is made of high-quality steel and electro-galvanised for protection against corrosion. Advantages Thanks to the hinge design, suitable for installation on inclined or tilted steel beams without welding or drillingThe connection can be rotated through 360° and allows installation at any angle (0–180°)FM and VdS approval guarantee tested functional reliabilitySuitable for stationary sprinkler installationsCompact and robust design with high load capacityM8 or M10 internal thread allows quick and simple installation of threaded endsSuitable for steel beams with a flange thickness of up to 17 mm Applications For easy fixing of pipes or channels to inclined or tilted steel beamsFor hanging sprinkler pipes on inclined or tilted steel beams up to an angle of max. 25°, in accordance with FM and VdSFor pipes ≥ DN 65; when installed on inclined beams, the clamp must be secured with the SS-TKLG locking band (retaining strap)For piping systems up to DN 100 according to VdSSuitable for steel beams with a flange thickness of up to 17 mmOnly for use in dry indoor areas

The TKLP beam clamp makes it possible to fix FUS channels or steel plates to steel beams easily, without drilling or welding. This allows installation lines to be fixed quickly and directly to the steel structure using FUS channels. Advantages Fixing on steel beams without drilling or weldingQuick installationEasy to adjust Applications Installation of FUS channels or saddle flanges on steel beams without drilling or weldingSuitable for all common steel beams with a clamping range of up to 25 mmFor use in dry indoor spaces

The Beam clamp TKLS Steel Bite is an efficient fastening solution for steel beams without the need for welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, and in particular for sprinkler pipes. It is fixed in place with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM guarantee optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are meant for outdoor installations or very corrosive environments. Features Approval mark of VdS, FM and UL.Simple fixing without welding and screws. This saves time and cost.High load capacity thanks to the massive design.Thanks to the through hole, the height of the threaded rod can be set afterwards. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite prevent it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so that the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The Beam clamp TKLS Steel Bite is an efficient fastening solution for steel beams without the need for welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, and in particular for sprinkler pipes. It is fixed in place with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM guarantee optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are meant for outdoor installations or very corrosive environments. Features Approval mark of VdS, FM and UL.Simple fixing without welding and screws. This saves time and cost.High load capacity thanks to the massive design.Thanks to the through hole, the height of the threaded rod can be set afterwards. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite prevent it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so that the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The Beam clamp TKLS Steel Bite is an efficient fastening solution for steel beams without the need for welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, and in particular for sprinkler pipes. It is fixed in place with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM guarantee optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are meant for outdoor installations or very corrosive environments. Features Approval mark of VdS, FM and UL.Simple fixing without welding and screws. This saves time and cost.High load capacity thanks to the massive design.Thanks to the through hole, the height of the threaded rod can be set afterwards. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite prevent it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so that the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The Beam clamp TKLS Steel Bite is an efficient fastening solution for steel beams without the need for welding or drilling. The TKLS is suitable for every kind of pipe clamp fixing, and in particular for sprinkler pipes. It is fixed in place with the hammerset anchor. Thanks to the Steel Bite serration, the beam clamp cannot slide off the steel beam. The VdS mark and FM guarantee optimum safety during installation. The galvanised version is suitable for installations in buildings. The stainless steel versions are meant for outdoor installations or very corrosive environments. Features Approval mark of VdS, FM and UL.Simple fixing without welding and screws. This saves time and cost.High load capacity thanks to the massive design.Thanks to the through hole, the height of the threaded rod can be set afterwards. Advantages The shape of the TKLS with hammerset anchor simplifies fixing to steel beams without drilling and welding.The teeth of the TKLS Steel Bite prevent it from sliding off the steel beam.The VdS and FM approval give guaranteed safety.The sheet steel design of the TKLS Steel Bite guarantees the best load capacity.The TKLS Steel Bite offers the option of pre-assembling threaded rods, so that the height can also be set afterwards. Applications All kinds of fixings by threaded rods to steel beams with sloping flange plate up to 14%For VdS installations, safety plates SS-TKL are required from ø 65 mm

The Beam clamp TKR 27/18 is used to fix the profiles to the steel beams. Thanks to the design of the beam clamp, fixing without drilling or welding is possible. Thanks to the various lengths of the clamps, they can be fixed to practically all common T-beams. Features Beam clamp for direct connection of FUS channels to steel beams.Drilling or welding is not needed.For use in dry indoor areas. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

The beam clamp TKR 82 is used to fix the profiles to the steel beams. Through the design of the beam clamp, fixing without drilling or welding is possible. Thanks to the various lengths of the clamps, they can be fixed to almost all common T-beams. Features Beam clamp for direct connection of FUS channels to steel beams.Drilling or welding is not needed.Application-oriented corrosion protection through a hot-dip galvanised surface. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

The Beam clamp TKR 27/18 is used to fix the profiles to the steel beams. Thanks to the design of the beam clamp, fixing without drilling or welding is possible. Thanks to the various lengths of the clamps, they can be fixed to practically all common T-beams. Features Beam clamp for direct connection of FUS channels to steel beams.Drilling or welding is not needed.For use in dry indoor areas. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

The beam clamp TKR 82 is used to fix the profiles to the steel beams. Through the design of the beam clamp, fixing without drilling or welding is possible. Thanks to the various lengths of the clamps, they can be fixed to almost all common T-beams. Features Beam clamp for direct connection of FUS channels to steel beams.Drilling or welding is not needed.Application-oriented corrosion protection through a hot-dip galvanised surface. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

With the beam clamp TKR 21-42, the profiles are fixed to the steel beams. The design of the beam clamp allows fixing without drilling or welding. Thanks to the various lengths of the clamps, they can be fixed to virtually all common T-beams. Features Made of A4 stainless steel for outdoor spaces and corrosive environments.Fixing without drilling and welding. This saves costs and reduces the fire risk.Fixing on all standard steel T-beams. This reduces complexity.Easy adjustment of the channel height. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

The fischer Beam clamp TKR 31 is suitable for the direct fixing of pipes and ducts to steel beams. Thanks to the different lengths of the clamp side, the TKR 31 can be fixed to all common steel beams. No drilling or welding is needed first for fixing. The beam clamps can be dismantled. The galvanised version is suitable for installations in buildings. Features Beam clamp for direct connection of FLS channels to steel beams.Drilling or welding is not needed.For use in dry indoor areas. Advantages The design of the beam clamp allows safe installation without drilling or welding.The variable lengths of the sides of the beam clamp make it usable on practically all steel beams.The shape of the beam clamp guarantees easy adjustment of the connection to the profile. Applications Fixing of FLS channels to steel beams (two clamps required).

The Beam clamp TKR 27/18 is used to fix the profiles to the steel beams. Thanks to the design of the beam clamp, fixing without drilling or welding is possible. Thanks to the various lengths of the clamps, they can be fixed to practically all common T-beams. Features Beam clamp for direct connection of FUS channels to steel beams.Drilling or welding is not needed.For use in dry indoor areas. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

With the beam clamp TKR 21-42, the profiles are fixed to the steel beams. The design of the beam clamp allows fixing without drilling or welding. Thanks to the various lengths of the clamps, they can be fixed to virtually all common T-beams. Features Made of A4 stainless steel for outdoor spaces and corrosive environments.Fixing without drilling and welding. This saves costs and reduces the fire risk.Fixing on all standard steel T-beams. This reduces complexity.Easy adjustment of the channel height. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

The beam clamp TKR 82 is used to fix the profiles to the steel beams. Through the design of the beam clamp, fixing without drilling or welding is possible. Thanks to the various lengths of the clamps, they can be fixed to almost all common T-beams. Features Beam clamp for direct connection of FUS channels to steel beams.Drilling or welding is not needed.Application-oriented corrosion protection through a hot-dip galvanised surface. Advantages The design of the beam clamp allows fixing without drilling or welding.The different lengths of the clamp sides allow fixing to most standard beams.The design of the beam clamp guarantees easy sliding of the channel connection. Applications The fixing to the steel beam is made with two beam clamps

The fischer trapezoidal hanger TZ is a fixing element for trapezoidal sheets. For fixing sprinkler systems by fixing with a screw SKS M8x100 in the punched hole. For fixing other pipes with sheet metal screws or steel blind rivets. By setting the bending point, ideal adaptation to the shape of the trapezoidal sheets is possible. Thread M10. Features VdS certified.Setting of the bending point. Advantages The VdS approval of the TZ/TZH guarantees independently verified safety.The adjustable connecting nut of the TZH allows easy height adjustment afterwards.The specific bending points of the TZ/TZH allow ideal adaptation to the shape of the trapezoidal sheet. Applications Fixing element for trapezoidal sheets, in three versionsVersion for sprinkler installations by fixing with a screw SKS M8x100 in the punched holeFixing of other pipelines, alternatively with sheet metal screws or steel blind rivets

The fischer trapezoidal hanger TZ is a fixing element for trapezoidal sheets. For fixing sprinkler systems by fixing with a screw SKS M8x100 in the punched hole. For fixing other pipes with sheet metal screws or steel blind rivets. By setting the bending point, ideal adaptation to the shape of the trapezoidal sheets is possible. Thread M10. Features VdS certified.Setting of the bending point. Advantages The VdS approval of the TZ/TZH guarantees independently verified safety.The adjustable connecting nut of the TZH allows easy height adjustment afterwards.The specific bending points of the TZ/TZH allow ideal adaptation to the shape of the trapezoidal sheet. Applications Fixing element for trapezoidal sheets, in three versionsVersion for sprinkler installations by fixing with a screw SKS M8x100 in the punched holeFixing of other pipelines, alternatively with sheet metal screws or steel blind rivets