Installation technology

The compact fischer fixed point clamp FSFP with sound-insulating inlay is suitable for directing thermally caused pipe expansion in the desired direction, for example in heating and cooling installations.The FSFP is fully pre-assembled and fitted with a heat-resistant insulation inlay, which gives simple installation and cost savings.The galvanised version is suitable for installation inside buildings. Features Prevents unwanted movement between pipes and structures.The ageing-resistant insulation elements of the fixed points optimise sound insulation. Advantages The ageing-resistant insulation element of the fixed point is heat-resistant and prevents sound transmission to the structure.The fully pre-assembled FSFP fixed point gives fast and simple installation.Thanks to the compact design, the fixed point can take high pipe loads in all installation positions. Applications Prevents unwanted movement between pipes and structuresGuides the expansion in the desired direction

The compact fischer fixed point clamp FSFP with sound-insulating inlay is suitable for directing thermally caused pipe expansion in the desired direction, for example in heating and cooling installations.The FSFP is fully pre-assembled and fitted with a heat-resistant insulation inlay, which gives simple installation and cost savings.The galvanised version is suitable for installation inside buildings. Features Prevents unwanted movement between pipes and structures.The ageing-resistant insulation elements of the fixed points optimise sound insulation. Advantages The ageing-resistant insulation element of the fixed point is heat-resistant and prevents sound transmission to the structure.The fully pre-assembled FSFP fixed point gives fast and simple installation.Thanks to the compact design, the fixed point can take high pipe loads in all installation positions. Applications Prevents unwanted movement between pipes and structuresGuides the expansion in the desired direction

The compact fischer fixed point clamp FSFP with sound-insulating inlay is suitable for directing thermally caused pipe expansion in the desired direction, for example in heating and cooling installations.The FSFP is fully pre-assembled and fitted with a heat-resistant insulation inlay, which gives simple installation and cost savings.The galvanised version is suitable for installation inside buildings. Features Prevents unwanted movement between pipes and structures.The ageing-resistant insulation elements of the fixed points optimise sound insulation. Advantages The ageing-resistant insulation element of the fixed point is heat-resistant and prevents sound transmission to the structure.The fully pre-assembled FSFP fixed point gives fast and simple installation.Thanks to the compact design, the fixed point can take high pipe loads in all installation positions. Applications Prevents unwanted movement between pipes and structuresGuides the expansion in the desired direction

The compact fischer fixed point clamp FSFP with sound-insulating inlay is suitable for directing thermally caused pipe expansion in the desired direction, for example in heating and cooling installations.The FSFP is fully pre-assembled and fitted with a heat-resistant insulation inlay, which gives simple installation and cost savings.The galvanised version is suitable for installation inside buildings. Features Prevents unwanted movement between pipes and structures.The ageing-resistant insulation elements of the fixed points optimise sound insulation. Advantages The ageing-resistant insulation element of the fixed point is heat-resistant and prevents sound transmission to the structure.The fully pre-assembled FSFP fixed point gives fast and simple installation.Thanks to the compact design, the fixed point can take high pipe loads in all installation positions. Applications Prevents unwanted movement between pipes and structuresGuides the expansion in the desired direction

The high-quality fischer channel is a U-shaped profile with which horizontal and vertical structures can be built solidly. It allows fast and efficient fixing of pipes and supporting structures. The shape of the profile allows use of the complete range of fischer accessories. The internal serration in the channel guarantees an extremely strong and safe connection. The different thicknesses allow optimum matching to the required loads. The scale on the side of the channel makes cutting to length easier. Slotted holes of 30 x 14 mm placed at every 50 mm make fixing easier. Advantages The independent fire certification in accordance with MLAR/EN13501 guarantees retention of function in case of fire.Available in different lengths, thicknesses and dimensions that increase in steps.A very sturdy base plate creates a solid connection between the substrate and the structure.The slotted holes in the base plate are at right angles to each other, so the wall bracket can be aligned easily.The scale on the side of the channel makes cutting to length easier.The internal serration in the channel guarantees an extremely strong and safe connection. Applications Safe horizontal and vertical installationsFast and efficient fixing of pipes and supporting structures

The high-quality channel FUS is a U-shaped profile with which horizontal and vertical structures can be built solidly. It allows quick and efficient fastening of pipes and supporting structures. The shape of the profile allows the use of the complete range of accessories. The internal serration in the channel guarantees an extremely strong and safe connection. The different thicknesses allow optimum matching to the required loads. The scale on the side of the channel simplifies cutting to length. Slotted holes of 30 x 14 mm, placed every 50 mm, make fastening easier. Features Serration in the channel guarantees an extremely strong and safe connection.Scale on the side of the channel simplifies cutting to length.Slotted holes every 50mm make fastening easier. Advantages The independent fire certification in accordance with MLAR/EN13501 guarantees maintenance of function in case of fire.Available in different lengths, thicknesses and sizes that increase in steps.A very sturdy base plate creates a solid connection between substrate and structure.The slotted holes in the base plate are at right angles to each other, so the wall bracket can be aligned easily.Scale on the side of the channel simplifies cutting to length.The internal serration in the channel guarantees an extremely strong and safe connection. Applications Safe horizontal and vertical installationsQuick and efficient fastening of pipelines and supporting structures

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer threaded rod G A4 is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Stainless steel A2 for a heavily corrosive environment.Simple installation.Ideal for fischer installation systems. Applications For indoor and outdoor applications and in environments where parts are under high stress from corrosion.

The fischer threaded rod G is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Made of galvanised steel.Simple installation.Thread geometry makes screwing in easier.Ideal for fischer installation systems. Applications For use in dry indoor areas.

The fischer base plate GPL is a fixing element with a welded threaded bush. This allows other fixing elements from the fischer installation system to be fixed to the floor or to a channel. The base plate is made of high-quality steel and zinc-plated according to DIN EN 10111. Features Easy alignment of the bracket thanks to slotted holes.Galvanised.Ideal for fischer installation systems. Advantages The slotted holes in the base plate allow easy alignment of the bracket. Applications Creating dimensionally stable connections between the substrate and the pipe

The threaded stud GS is a connecting element between the fixing point in a load-bearing element and the fixing element in a suspended or standing element. Pipes or ventilation ducts, for example, are fixed to it. The threaded rod is made of high-quality steel. Features Galvanised.Simple installation.Ideal for fischer installation systems. Applications For use in dry indoor spaces.

The fischer Refrigeration pipe clamp KFT made of closed PUR foam is a pipe clamp with triple thread M 8/M 10 and ½“. The version with two screws allows optimal adjustment to the pipe diameter. In combination with the triple thread, flexibility is increased. The glued-in rubber contact surface also makes installation easier. Pipelines for refrigeration technology and air conditioners with an outer diameter of 12 - 219 mm and an insulation thickness of up to 40 mm can therefore be reliably fixed indoors with threaded rods or stud screws. The ageing-resistant insulation material guarantees optimal function of the refrigeration clamps. Features Nut with triple thread.Glued rubber contact surface. Advantages The refrigeration clamp KFT made of closed PUR foam can be used with all standard insulation materials.The glued-in rubber layer makes installation easier.The connecting nut with triple thread M8 / M10 / 1/2" guarantees flexibility on site.Ageing-resistant material ensures constant function of the KFT.The system with two screws allows optimal adjustment to the outer diameter of the pipe. Applications Installation of pipelines in refrigeration and air conditioning technology with heavy loads

The perforated steel banding LBV has punched holes for simple installation; in galvanised version. Because of the plate thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Galvanised. Advantages The thickness and plastic coating of the perforated band allow easy shortening with the metal shears.The perforated geometry of the perforated band is ideal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for simple installation, available in the galvanised version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The fischer Air duct hanger L- and Z-type are fixing elements with reliable sound insulation between ventilation pipes and the substrate. The various drill holes allow simple fixing with self-drilling screws or nails. That saves time. Through a drill hole in the sound-insulating element, the height of the ducts can still be adjusted both during and after installation. The ventilation clamp is available in the versions LKHN and LKH for fixing to the duct faces and in the versions ZKHN and ZKH for fixing to the duct corners. Advantages The sound-damping element of the ventilation clamp reduces the transmission of vibration and flow noise.The various holes in the ceiling fixing allow simple and quick fixing with self-drilling screws or rivets.The feed-through hole in the ceiling fixing allows simple alignment and height adjustment of the threaded rod. Applications Fixing component with sound damping

The fischer hex nut MU is a fastening element made of stainless steel A4. It is used to fasten various fastening elements of the fischer installation system to each other. Features For threaded rods and hex screws.Made of stainless steel A4. Applications For applications indoors and outdoors and in environments with high corrosion stress on components.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.

The fischer Heavy duty pipe clamp FRSMN is a two-bolt pipe clamp made of electro-galvanised steel with a double connection nut. Available with an M16 connection nut from DN 300. The connection nuts are passed through or welded all round and give a pipe fixing with the highest bending strength. The two-screw design allows optimised adaptation to the outer diameter of the pipe clamp. In this way, pipelines with an outer diameter of 15-521 mm can be fastened safely indoors with a threaded rod or stud screw. The FM and VdS approval guarantees objectively tested safety for use in sprinkler systems. Features FM and VdS approvalDouble connection nut passed through or welded all roundClamping ranges from 15 - 521 mm Advantages FM and VdS approval guarantees objectively tested safety for use in sprinkler systems.The FRSMN without sound insulation insert is ideal for industrial applications and plastic pipes.The connection nuts with combination thread give flexibility on site.The two-screw design allows optimised adaptation to the outer diameter of the pipe.The screws cannot be lost, which guarantees trouble-free installation. Applications Fastening of metal or plastic pipes without sound insulation requirements with threaded ends or screws, for example in industrial buildings.Fastening of sprinkler pipes in accordance with FM and VdS guidelines.For use in dry indoor areas.