Installation technology

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The Air duct hanger L- and Z-type are fixing elements with reliable sound insulation between ventilation ducts and the substrate. Thanks to the various drill holes, simple fixing with drilling screws or nails is possible. That saves time. Through a drill hole in the sound-insulating element, the height of the ducts can still be adjusted both during and after installation. The ventilation duct clamp is available in the versions LKHN and LKH for fixing to the duct faces, and in the versions ZKHN and ZKH for fixing to the duct corners. Features Nut with thread M8.Sound-insulating element Advantages The sound-damping element of the ventilation duct clamp reduces the transfer of vibration and flow noise.The various holes in the ceiling fixing allow simple and fast fixing with self-drilling screws or rivets.The through hole in the ceiling fixing allows simple alignment and height adjustment of the threaded rod. Applications Fixing part with sound damping

The load distribution plate for flat roofs is a safe and solid way to create installations on flat roofs and is designed for optimum distribution of the load to the roof. The load distribution plates have a flat underside and have extra protective and separating layers that make sure the roofing is not damaged. In addition, the load distribution plates and the hot-dip galvanised FUS channel system form the ideal basis for load distribution on flat roof structures. Features Round-head bolt for fixing channels to fischer load distribution plates. Advantages The fischer load distribution plate spreads the weight of the structure over a larger area and protects the roof surface.Matched to the proven hot-dip galvanised FUS channel system, it guarantees an economical solution.The material of the base plate allows weather-resistant, durable and safe fixing of supports on flat roofs. Applications Pipes and cable trays on flat roofsVentilation ducts and pipes on flat roofsAir conditioning systems, heat exchangers and cooling towers, etc. on flat roofsMaintenance platforms, walkways and bridgesSolar thermal or photovoltaic systemsProtection of membrane roofsWind safety fixings

The fischer flat eye screw LLS is a fastening element made of zinc plated steel. The screw can be fixed directly in wood, or with a plastic anchor with wood screw. Features Easy adjustment through the slotted hole.With wood thread.Made of galvanised steel. Applications For use in dry indoor areas.

The fischer flat eye screw LLS is a fastening element made of zinc plated steel. The screw can be fixed directly in wood, or with a plastic anchor with wood screw. Features Easy adjustment through the slotted hole.With wood thread.Made of galvanised steel. Applications For use in dry indoor areas.

The fischer ventilation duct clamp LRB is a fixing component with a sound-insulating element, in riveted and push-in versions, for hanging spiral ducts with threaded rods. The sound-insulating element reduces the transmission of vibration and flow noise. The various drill holes in the ventilation duct clamp allow simple fixing with self-drilling screws or nails. The continuous hole in the ventilation duct clamp allows simple alignment and height adjustment of the fixing. The riveted version gives the ventilation duct clamp extra sturdiness. By setting the bending point, it can be adjusted optimally to the pipe diameter. Features Sound-insulating elementNut with M8 thread. Advantages The various holes in the ventilation duct clamps allow simple and fast fixing with self-drilling screws or rivets.The sound-damping element of the ventilation duct clamp reduces the transmission of vibration and flow noise.The through hole in the ventilation duct clamps allows simple alignment and height adjustment of the threaded rod.The riveted version gives the ventilation duct clamps more stability.The specific shape of the ventilation duct clamp allows ideal adjustment to the pipe diameter.The design of the LRN / LRNB offers an alternative use as a sound-damping profile clamp. Applications Fixing component with sound damping in riveted or push-in version

The fischer spiral duct hanger LRBN is a fixing part with a sound-insulating element, in riveted and inserted version, for hanging spiral ducts with threaded rods. The sound-insulating element reduces the transfer of vibration and flow noise. Thanks to the various drill holes in the ventilation duct clamp, simple fixing with drilling screws or nails is possible. The through hole in the ventilation duct clamp allows simple alignment and height adjustment of the fixing. The riveted version gives the ventilation duct clamp extra strength. By setting the bending point, optimum adaptation to the pipe diameter is possible. Features Sound-insulating elementNut with combination thread M8/M10. Advantages The various holes in the ventilation duct clamps allow simple and fast fixing with self-drilling screws or rivets.The sound-damping element of the ventilation duct clamp reduces the transfer of vibration and flow noise.The through hole in the ventilation duct clamps allows simple alignment and height adjustment of the threaded rod.The riveted version gives the ventilation duct clamps more stability.The specific shape of the ventilation duct clamp allows ideal adaptation to the pipe diameter.The design of the LRN / LRNB offers an alternative application as a sound-damping profile clamp. Applications Fixing part with sound damping in riveted or inserted version

The fischer hole stamp LST is an attachment for the fischer hole punch LZ. This is a tool for punching holes in trapezoidal sheets and trapezoidal ceilings. Features Robust design. Advantages The hole punch LZ is easy to use in every application.Because of the long lever, only little force is needed.The punching tools LZ and LST are interchangeable. Applications Tool for punching holes in steel plates

The fischer hole stamp LZ is a tool for stamping holes in trapezoidal sheets and trapezoidal ceilings. Features A long lever makes punching the holes easier.Exchangeable punches extend the service life of the trapezoidal sheet pliers. Advantages The hole punch LZ is easy to use, in every application.Because of the long lever, only little force is needed.The punching tool LZ and LST are interchangeable. Applications Tool for punching holes in steel sheets

The fischer pipe clamp FRS is a two-screw pipe clamp made of zinc-plated steel in material grade DD11 with an M8/M10 combination connection thread. The two-screw design allows optimum adjustment to the outer diameter of the pipe. Together with the combined connection thread, this increases flexibility. This means that pipes with an outer diameter of 12 to 168 mm can be fixed safely with a threaded rod or set screw indoors, in line with the fire safety requirements of fire resistance class R 120 and MLAR. With a chlorine-free and silicone-free sound insulation insert, the pipe clamp meets the requirements of DIN 4109. The fischer FRS is suitable for applications in the temperature range from -40°C to +100°C. Features Sound-insulating material.With two screws for optimum adjustment to the pipe diameterScrew loss protection.Fire safety approval R120. Advantages The fire inspection report guarantees independently verified safety.The two-screw system allows optimum adjustment to the outer diameter of the pipe.The connecting nut with combined M8/M10 thread gives flexibility on site.The sound-damping inlay guarantees sound damping and prevents contact corrosion.The screws cannot be lost, which guarantees trouble-free installation. Applications Safe fixing of pipes with threaded rods or stud screws, also where fire safety requirements are strict

The fischer construction elements Mounting angle MW 90° and MWU 90°, together with the channel nut FSM Clix P, give exactly fitting and simple connections of channels to each other or to the substrate. The special fixing tabs allow the MW 90° to be placed correctly both lengthways and crossways to the FLS channel profile. The MWU can be fastened directly to the substrate, saving space. To suit the FSM Clix P 8 and the plugs with an outer diameter of 8 mm, the MW and MWU angles have a hole with a diameter of 8.5 mm. The galvanised version is suitable for installations in buildings. Features Simple creation of structures in combination with FUS channels and FCN Clix P channel nutsCorrosion protection by galvanisingFor use in dry indoor areas Advantages The characteristic locking clamps of the Mounting angle MW 90° guarantee a stable fit on all sides of the profile.The long slotted hole on the flat side of the Mounting angle MWU 90° allows a firm connection to the substrate.The standardised holes in the Mounting angle allow an exact connection to FLS profiles in combination with click nut FSM Clix P and bolt. Applications Setting up simple structures with the help of the sliding nut FSM Clix P

The fischer mounting angle MW 90° Clix allows a perfectly fitting connection to the channel FLS. The mounting angle can be installed quickly thanks to the click bolt with 90° rotation. The spring element in the T-head bolt allows exact positioning in the channels. Features Easy making of channel constructions in combination with FLS channels.Corrosion protection through galvanising.For use in dry indoor spaces. Advantages Pre-assembled accessories such as the SF Clix reduce the number of items for a connection and guarantee time-saving installation.The pre-assembled connector of the MW Clix secures the installation position thanks to the unique pressure block and guarantees safe and fast installation. The specially developed spring leg on the pre-assembled connector guarantees the necessary contact pressure of the connector on the channel and ensures secure positioning during installation.The form-fitting and precisely fitting angle bracket of the MW Clix allows simple installation of the FLS channel and saves valuable installation time. Applications Element for the stable build-up of angle connections with FLS channels.For use in dry indoor spaces.

The structural elements fischer universal brackets MW 90° and MWU 90°, together with the channel nut FSM Clix P, provide exactly fitting and easy connections of channels to each other or to the substrate. The special fixing lugs allow the MW 90° to be placed correctly both lengthwise and crosswise to the FLS channel. The MWU can be fixed directly to the substrate, saving space. The MW and MWU angles have a hole with a diameter of 8.5 mm to match the FSM Clix P 8 and plugs with an outer diameter of 8 mm. The galvanised version is suitable for installations in buildings. Features Easy creation of structures in combination with FUS channels and FCN Clix P channel nutsCorrosion protection through galvanisingFor use in dry indoor spaces Advantages The long slot on the flat flange of the MWU 90° angle bracket allows a direct connection to the substrate for space-saving fixing.The standardised holes in the angle brackets allow an exact connection to the FLS channels using FSM Clix P and a screw. Applications Connecting element for making simple channel structures with the channel nut FSM Clix P.For use in dry indoor spaces.

The fischer hexagonal nut MU is a fixing element made of zinc plated steel. It is used to fix various fixing elements of the fischer installation system to each other. Features For threaded rods and hexagonal bolts.Pre-formed hexagonal fixing. Applications For use in dry indoor areas.