Installation technology

The fischer perforated steel banding LBK with punched holes for easy installation; plastic-coated version. Thanks to the sheet thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Polyethylene protective coating. Advantages The thickness and plastic coating of the perforated band allow easy shortening with metal shears.The perforated geometry of the band is optimal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for easy installation, available in the zinc-plated version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The fischer perforated steel banding LBK with punched holes for easy installation; plastic-coated version. Thanks to the sheet thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Polyethylene protective coating. Advantages The thickness and plastic coating of the perforated band allow easy shortening with metal shears.The perforated geometry of the band is optimal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for easy installation, available in the zinc-plated version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The perforated steel banding LBV has punched holes for simple installation; in galvanised version. Because of the plate thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Galvanised. Advantages The thickness and plastic coating of the perforated band allow easy shortening with the metal shears.The perforated geometry of the perforated band is ideal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for simple installation, available in the galvanised version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The perforated steel banding LBV has punched holes for simple installation; in galvanised version. Because of the plate thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Galvanised. Advantages The thickness and plastic coating of the perforated band allow easy shortening with the metal shears.The perforated geometry of the perforated band is ideal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for simple installation, available in the galvanised version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The perforated steel banding LBV has punched holes for simple installation; in galvanised version. Because of the plate thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Galvanised. Advantages The thickness and plastic coating of the perforated band allow easy shortening with the metal shears.The perforated geometry of the perforated band is ideal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for simple installation, available in the galvanised version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The perforated steel banding LBV has punched holes for simple installation; in galvanised version. Because of the plate thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Galvanised. Advantages The thickness and plastic coating of the perforated band allow easy shortening with the metal shears.The perforated geometry of the perforated band is ideal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for simple installation, available in the galvanised version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The perforated steel banding LBV has punched holes for simple installation; in galvanised version. Because of the plate thickness of the perforated bands, they can easily be shortened with metal shears. Thanks to the hole geometry of the perforated band, it can easily be fixed to the floor with fischer impact nails ED. Features Galvanised. Advantages The thickness and plastic coating of the perforated band allow easy shortening with the metal shears.The perforated geometry of the perforated band is ideal for floor fixing with the fischer impact nail ED. Applications Steel band with punched holes for simple installation, available in the galvanised version LBV or the plastic-coated version LKBThe fischer nail anchor FNA II is suitable for ceiling installation in concreteFor fixing to threaded rods, the fischer thread hanger RAH must be used

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm

The fischer ventilation duct clamp LGS is the ideal fixing solution for all types of ventilation ducts. With the LGS, you can fix spiral ducts to the substrate particularly easily and quickly. The large opening angle makes it easy to insert the pipe, while the two-screw concept of the LGS allows optimal adjustment to the outer diameter of the pipe. The LGS has holes on both halves of the clamp from a diameter of 450 mm. This allows the recommended load to be doubled with two threaded rods with nuts. The sound-insulating insert provides reliable acoustic decoupling from the structure. Features With two screws for optimal adjustment to the pipe diameterScrew captive protection.Sound-insulating material.Nut with combination thread M8/M10. Advantages The large opening angle of the LGS allows quick and easy installation.With the two-screw system, the LGS can be adjusted optimally to the outer diameter of the pipe.The locking screw with large slotted/cross head is protected against loss and ensures extra reliable installation.The sound-damping inlay sits firmly and cannot fall out of the clamp when the pipes are adjusted.From a diameter of 450 mm, the LGS has holes on both clamp halves. This allows a connection with two screws and nuts or with two threaded rods and nuts. This makes it possible to double the recommended load. Applications Installation of air ductsPipes with a diameter from 450 mm can be fixed with two threaded rods placed at the sidesA sound-damping inlay is glued in from ø 450 mm