Steel fixings

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.Effort-saving series installation with the machine setting tool EA II S-SDS.ETA approval for non-cracked concrete.Made of stainless steel for outdoor fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork props

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The Hammerset anchor EA II M 12 D is a hammerset anchor with internal thread, made of galvanised steel. It is ideal for anchoring diamond drilling machines and diamond saws. The anchor sleeve is reinforced to take up loads. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. With the setting tool EHS Plus, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. For correct expansion, no torque needs to be applied to the screw. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.ETA approval for non-cracked concrete. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork propsDiamond and core drilling equipment

The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.Effort-saving series installation with the machine setting tool EA II S-SDS.ETA approval for non-cracked concrete.Made of stainless steel for outdoor fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork props

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.Effort-saving series installation with the machine setting tool EA II S-SDS.ETA approval for non-cracked concrete.Made of stainless steel for outdoor fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork props

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.Effort-saving series installation with the machine setting tool EA II S-SDS.ETA approval for non-cracked concrete.Made of stainless steel for outdoor fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork props

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.Effort-saving series installation with the machine setting tool EA II S-SDS.ETA approval for non-cracked concrete.Made of stainless steel for outdoor fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork props

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.Effort-saving series installation with the machine setting tool EA II S-SDS.ETA approval for non-cracked concrete.Made of stainless steel for outdoor fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork props

The hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler installations, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixings of non-structural systems and the fire suitability in accordance with fire resistance class R 120 offer much more safety. The hammerset anchor is installed with the hammer, flush with the surface of the anchoring material. The thickened rim prevents it from slipping in deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal stud and so clamps against the wall of the drill hole. Features Simple impact installation: it does not slip in deeper during installation thanks to the clear rim of the injection sleeve.Use of common metric bolts and threaded rods reduces complexity.Labour-saving series installation with the machine setting tool EA II S-SDS.Visual check by stamped marking.ETA approval for non-cracked concrete and multiple fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.Thanks to the metric internal thread, it is possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially for series installation.When you drive in the anchor with the EHS plus setting tool, you can see by visual check whether the anchor is placed correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black anti-fall-out device of the EA II K prevents the anchor from falling out of the drill hole during overhead installation.With the EA II K, hitting reinforcement while drilling is virtually excluded thanks to the very short anchorage depth of only 25 mm. Applications Pipelines and ventilation systemsSprinkler installationsCable trays and cablesGratingSteel structuresMachinesBracketsShoring of formwork

The Hammerset anchor EA II is a hammerset anchor with internal thread, made of galvanised and stainless steel. The hammerset anchor is ideal for anchoring sprinkler systems, cable trays or brackets, indoors and outdoors. The ETA approval for non-cracked concrete, the approval for multiple fixing of non-structural systems and the fire suitability in line with fire resistance class R 120 offer much more safety. The hammerset anchor is set with a hammer, flush with the surface of the anchoring material. The thickened rim prevents it from sliding deeper. With the setting tool EAW H Plus or the machine setting tool EA II S-SDS, the sleeve is expanded by driving in the internal pin and so clamps against the wall of the drill hole. Features Simple impact installation: the clear rim of the anchor sleeve stops it from sliding deeper during installation.Use of common metric bolts and threaded rods reduces complexity.Effort-saving series installation with the machine setting tool EA II S-SDS.ETA approval for non-cracked concrete.Made of stainless steel for outdoor fixings. Advantages The anchor rim prevents the hammerset anchor from being driven too far into the drill hole.The metric internal thread makes it possible to use standard metric bolts or threaded rods.The EMS setting tool allows effortless installation, especially in series installation.When you drive in the anchor with the EHS plus setting tool, you can check by sight that the anchor is set correctly. The tool strikes a notch in the rim of the anchor when the anchor is fully expanded against the drill hole wall.The black fall-out protection of the EA II K stops the anchor from falling out of the drill hole during overhead installation.Hitting reinforcement while drilling is almost ruled out when using the EA II K, thanks to the very short anchorage depth of only 25 mm. Applications Pipework and ventilation systemsSprinkler systemsCable trays and wiresLattice workSteel structuresMachinesBracketsFormwork props

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The Bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile loads for a wide range of applications. With this steel anchor, heavy loads can be fixed in cracked concrete. The FAZ II Plus is easier and faster to install because drill hole cleaning is not needed (applies to M8 - M24). The proven expansion clip transfers the loads safely into the concrete and allows a high load capacity that can be loaded immediately. The steel anchor is ideal, for example, for anchoring handrails, heavy cable trays and brackets. Features Quick and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors are needed.The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.The quick installation of the FAZ II Plus offers an efficient fixing solution for dynamic applications (M16-24) and can also be loaded immediately.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The FAZ II Plus absorbs high seismic loads of performance category C1 and C2 for diameters M10-M24. Use of the filling washer FFD is optional.The variable anchorage depth allows adjustment to the load accurate to the millimetre.The first segment anchor M6 with ETA option 1 certification guarantees safe anchoring. Applications Steel structuresCrash barriersBracketsTunnelsLiftsLifting platformsConveyor beltsPumpsLaddersCable traysMachinesStairsFaçadesTimber structures

The fischer bolt anchor FAZ II Plus GS with large washer is the steel anchor for the highest demands. This electro-galvanised anchor has ETA certification for very high loads in cracked concrete. The variable anchorage depths and simple installation make the bolt anchor FAZ II Plus GS very flexible to use. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. Features Pre-assembled washer for fixtures with oversized holes. This makes alignment easier and saves time during installation.Fast and simple installation without drill hole cleaning (M8-M24).Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24, with and without the filling washer FFD. Advantages Thanks to the special washer, the FAZ II Plus GS is very suitable for steel fixtures with oversized holes and helps to reduce installation effort.The much larger outer diameter of the washers for FAZ II Plus 16 GS gives a larger bearing surface and so allows use in timber construction.Fast and simple installation without drill hole cleaning (M8-M24).Numerous approvals for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts a lifetime and is perfectly suited to large building projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load to the millimetre. Applications Base plates with oversized holesFaçade structures with oversized holesTimber structuresTension anchorsAnchoring of timber beams

The fischer Bolt anchor FAZ II Plus GS made of stainless steel with large washer is the steel anchor for the highest demands. This stainless steel anchor is ETA certified for very high loads in cracked concrete. Thanks to the variable anchorage depths and simple installation, the stainless steel bolt anchor FAZ II Plus GS is exceptionally flexible in use. The proven expansion segment transfers the loads safely into the concrete and ensures maximum load capacity. The stainless steel version can be used for outdoor applications. The steel anchor with large washer is therefore ideal for fixing handrails, brackets and steel structures. Features Pre-assembled washer for attachments with slotted holes. This simplifies alignment and saves time during installation.Quick and simple installation without drill hole cleaning (M8-M24).Stainless steel: maximum safety for outdoor use.Much higher tensile loads thanks to the new ETA certification. This allows fewer fixing points and smaller base plates.Adjustment to the loads accurate to the millimetre through the variable anchorage depths.Highest seismic loads for diameters M10-M24 with and without the use of the filling washer FFD. Advantages Thanks to the special washer, the FAZ II Plus GS is very well suited to steel attachments with slotted holes and helps reduce installation effort.The considerably larger outer diameter of the washers for FAZ II Plus 16 GS provides a larger bearing surface and so makes use in timber construction possible.Quick and simple installation without drill hole cleaning (M8-M24).Numerous certifications for different substrates (concrete C12/15 to C80/95, fibre-reinforced concrete, solid sand-lime brick) for a very wide range of applications.With the new ETA certification, the tensile strengths have increased considerably. This means fewer fixing points and so fewer anchors.The ETA certification, together with other test reports (RWS, ZTV and ETK), guarantees high loads in case of fire.An independent external assessment guarantees a service life of up to 120 years. The FAZ II Plus therefore lasts an eternity and is perfectly suited to large construction projects where a long service life is required (M10-M16).The variable anchorage depth allows adjustment to the load accurate to the millimetre. Applications Base plates with slotted holesFaçade structures with slotted holesTimber structuresTension anchorsAnchoring of timber beams